Bosch HBJ538E 0M Series User Manual And Installation Instructions page 10

en Basic operation
Ventilate the room while the appliance is heating.
3.
Set the type of heating and the temperature.
4.
→ "Basic operation", Page 10
Type of heat- 3D hot air
ing
Temperature Maximum
Cooking time 1 hour
Basic operation
6 Basic operation
6.1 Switching on the appliance
Turn the function selector to any position other than
▶
the "Off" position ⁠ .
a The appliance is switched on.
6.2 Switching off the appliance
Turn the function selector to the "Off" position ⁠ .
▶
a The appliance is switched off.
6.3 Types of heating and temperature
Use the function selector to set the type of heating.
1.
Use the temperature selector to set the temperature
2.
or grill setting.
a The appliance starts heating after a few seconds.
Rapid heating
7 Rapid heating
To save time, you can use the rapid heating to shorten
the preheat time.
Only use rapid heat-up when a temperature of over
100 °C has been set.
After rapid heating, it is best to use the following types
of heating:
¡ 3D hot air
¡ Top/bottom heating
7.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Time-setting options
8 Time-setting options
Your appliance has different time-setting options which
ensure that operation can be controlled.
8.1 Overview of the time-setting options
You can use the button to select the different time-
setting options.
10
Switch off the appliance after the specified cooking
5.
time.
Wait until the cooking compartment has cooled
6.
down.
7. Clean the smooth surfaces with soapy water and a
dish cloth.
Clean the accessory with soapy water and a dish
8.
cloth or a soft brush.
3. When the dish is ready, switch off the appliance.
Tips
¡ The most suitable type of heating for your food can
be found in the description of the types of heating.
¡ You can also set a cooking time and an end time
on the appliance.
→ "Time-setting options", Page 10
Changing the type of heating
You can change the type of heating at any time.
Use the function selector to set the required type of
▶
heating.
Changing the temperature
You can change the temperature at any time.
Turn the temperature selector to set the desired
▶
temperature.
Use the function selector to select rapid heating ⁠ .
1.
Use the temperature selector to set the required
2.
temperature.
a Rapid heating starts after a few seconds.
a When the rapid heating process ends, an audible
signal sounds and the heating indicator goes out.
Use the function selector to set a suitable type of
3.
heating.
Place the food in the cooking compartment.
4.
Time-setting Use
option
Timer The timer can be set independently
of the operation. It does not affect
the appliance.
Cooking time If a cooking time has been set for
the operation, the appliance stops
heating automatically once this time
has elapsed.