Bosch HBJ538E 0M Series User Manual And Installation Instructions page 12

en Childproof lock
is highlighted in the display.
Requirement:
Use the ⁠ or ⁠ button to delay the end time.
▶
a The appliance applies the change after a few
seconds.
Cancelling the end time
You can delete the set end time at any time.
is highlighted in the display.
Requirement:
Reset the end time to the current time plus the set
▶
cooking time using the
a After a few seconds, the appliance applies the
change and starts heating up. The cooking time
counts down.
Childproof lock
9 Childproof lock
Secure the appliance to prevent children from accident-
ally switching it on or changing the settings.
Notes
¡ The option to set the childproof lock can be activ-
ated in the Basic settings .
¡ After a power cut, the childproof lock will no longer
be active.
Basic settings
10 Basic settings
You can configure the basic settings for your appliance to meet your needs.
10.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
⁠ ⁠
⁠ ⁠
1 Factory setting (may vary according to model)
10.2 Changing basic settings
Requirement: The appliance is switched off.
12
button.
Basic setting
Clock display
Signal duration upon completion of a
cooking time or timer period
Acoustic signal when a button is
pressed
Cooling fan run-on time
Waiting time until a setting is adop-
ted
Childproof lock can be adjusted
→ "Childproof lock", Page 12
8.5 Setting the time
Once the appliance has been connected to the mains
or after a power cut, the time flashes in the display. The
time starts at "12:00". Set the current time.
Requirement: The function selector must be set to the
off position.
Use ⁠ or to set the time.
1.
Press ⁠ .
2.
a The time that is set appears in the display.
Tip: You can define whether the time is shown in the
display in the basic settings.
9.1 Activating and deactivating the
childproof lock
Requirement: The function selector must be set to the
off position.
To activate the childproof lock, press and hold the
▶
⁠ button until ⁠ appears in the display.
To deactivate the childproof lock, press and hold
‒
the ⁠ button until
Selection
= hide the time
= display the time
= 10 seconds
= 30 seconds
= 2 minutes
= off
= on
= short
= medium
= long
= extra long
= 3 seconds
= 6 seconds
= 10 seconds
= no
= yes
Press and hold the
1.
four seconds.
a The first basic setting appears in the display, e.g. ⁠
⁠ ⁠ .
Use the ⁠ or ⁠ button to change the setting.
2.
⁠ goes out in the display.
1
1
1
1
1
1
⁠ button for approx.