To Arm The System; To Disarm The System - Dodge Challenger SRT Includes 392/Hellcat 2016 Owner's Manual

20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

To Arm The System

Follow these steps to arm the Vehicle Security Alarm:
1. Make sure the vehicles ignition is cycled to the "OFF"
position (refer to Starting Procedures in Starting
And Operating for further information).
• For vehicles equipped with Keyless Enter-N-Go —
Passive Entry, make sure the vehicles keyless igni-
tion system is OFF.
• For vehicles not equipped with Keyless Enter-N-Go
— Passive Entry, make sure the vehicle ignition
system is OFF, and the key is physically removed
from the ignition.
2. Perform one of the following methods to lock the
vehicle:
• Push LOCK
button on the interior power door
lock switch with the driver and/or passenger
door open.
• Push the LOCK
Entry Door Handle with a valid key fob available
in the same exterior zone (refer to Keyless Enter-
N-Go — Passive Entry in Things To Know Before
Starting Your Vehicle for further information).
• Push the LOCK
3. If any doors are open, close them.

To Disarm The System

The Vehicle Security Alarm can be disarmed using any of
the following methods:
• Push the UNLOCK button on the key fob.
• Grasp the Passive Entry Unlock Door Handle (if
equipped, refer to "Keyless Enter-N-Go — Passive
Entry" in Things To Know Before Starting Your Ve-
hicle for further information).
button on the exterior Passive
button on the key fob.