Control Buttons On The Tv; Buttons Of The Remote Control; Turning On The Television And Switching It To Standby Mode - Grundig 40 GEF 6930 A Brief Instruction

OVERVIEW
AC IN: Power cord input.
7
SERVICE: Service only.
7
LAN: Network connection.
7
Optic Out: optical audio output.
7
HDMI2 (ARC): Input for digital audio and
7
image data.
HDMI1: Input for digital audio and image
7
data.
USB (HDD): Data media such as an external
7
hard disk to record programs will be con-
nected here.
SATELLITE: Input for satellite antenna signal.
7
Suitable for single-cable SCR system.
ANT IN: For antenna cable (terrestrial an-
7
tenna or cable connection).
U : External audio output or headphone jack
7
with adapter.
CI: For CA modules for receiving scramble
7
channels.
14 / 81 EN
--------------------------------------------------------------------------------------------------------------

Control buttons on the TV

Buttons of the remote control

Turning on the television and
switching it to standby mode
1 Press 8 /I to turn on the television in the
stand-by mode.
2 Press 8 /I to switch the television to the
stand-by mode.
Television / User Manual