Grundig 40 GEF 6930 A Brief Instruction page 159

Table of Contents

Advertisement

Available languages

Available languages

GLOSSARY
Film mode
Detects and processes feature films automati-
cally for all channel sources. This means that
you get the optimum picture at all times.
This functions in the mode 480i, 576i and 1080i
in TV playback and for other channel sources.
If the "Movie Mode" is switched on for pro-
grammes without a feature film signal, minor
problems such as picture freeze, defective sub-
titles or fine lines in the picture could occur.
Firmware version
Firmware is the term used for software that is em-
bedded in a programmed chip (microcontroller).
It is mostly stored in a flash memory, an EPROM
or an EEPROM. The firmware contains functions
for controlling the device.
Gamma
This setting establishes which brightness value
should be displayed for which digital transmis-
sion value. Most recordings are transmitted with
a gamma value of 2.2 (all Windows PCs and
newer PCs with a MAC operating system work
with this; older MAC systems and transmissions
without colour profile mostly operate with a
gamma value of 1.8).
Gateway
A gateway allows networks, which may be
based on completely different protocols, to
communicate with each other. In the home area,
a combination of the router and the DSL modem
are used as an Internet gateway.
Hardware version
Hardware in this context means the device.
This includes all components such as processor,
display, etc.
HbbTV
HbbTV is the interactive successor of video text,
which has content with a modern design, high
resolution images and video sequences as well
as media libraries.
For full functionality of HbbTV, the TV must be
connected to the Internet.
HD/Full HD/UHD
Television / User Manual
--------------------------------------------------------------------------------------------------------------
High Definition (HD) TV is a general name for
the television standard that has increased verti-
cal, horizontal and timewise definition.
Full HD is a feature of devices with HDTV that
can output or record 1920x1080 pixels of
definition.
HD is 3840 x 2160 for UHD.
IP Address
An IP address (Internet protocol address) is used
to uniquely identify the address of computers
and other devices in an IP network. The most
well-known network in which IP addresses are
used is the Internet. Here, for example, web
servers are addressed using the IP address.
The IP address can be provided automatically
by the router (automatic address) or can be
entered manually in the router (static address).
If it is entered manually, this address must be
entered in the TV set.
JPEG
JPEG stands for Joint Picture Experts Group. It
is the process where the picture data are com-
pressed.
Screen cast
With Screen cast, all content can be transferred
between PC and TV through Wi-Fi via mobile
devices (smart phone or tablet). HD content can
also be transferred to the TV easily.
LNB
The Low Noise Block resides at the center of
parabolic antenna.
For example: It implements the satellite frequen-
cies that are between 10.7–11.75 or 11.8–
12.75 GHz in 950 to 2150 MHz and ensures
cable transmission with coaxial cables (and with
fiber-optic cables recently) and reception with
satellite receivers.
MP3
Compressed audio file format.
77 / 81 EN

Advertisement

Chapters

Table of Contents
loading

Table of Contents