Inserting Batteries Into The Remote Control - Grundig 40 GEF 6930 A Brief Instruction

CONNECTION/PREPARATION
Inserting batteries into the re-
mote control
1 Open the battery compartment by removing
the lid.
2 Insert the batteries (2 x 1.5 V micro; for
example R03 or AAA). Observe the polarity
(marked on the base of the battery compart-
ment).
3 Close the battery compartment.
Note:
If the television no longer reacts properly
7
to remote control commands, the batter-
ies may be flat. Be sure to remove used
batteries.
The manufacturer accepts no liability for
7
damage resulting from used batteries
12 / 81 EN
-----------------------------------------------------
Environmental note
This symbol on the battery
7
or on the packaging
indicates that the
battery provided with
this product shall not be
treated as household waste. On certain
batteries this symbol might be used in
combination with a chemical symbol. The
chemical symbols for mercury (Hg) or lead
(Pb) are added if the battery contains more
than 0.0005% mercury or 0.004% lead.
Batteries, including those which contain
no heavy metal, may not be disposed of
with household waste. Please dispose of
used batteries in an environmentally sound
manner. Find out about the legal regulations
which apply in your area.
Television / User Manual