Recording Programmes - Grundig 40 GEF 6930 A Brief Instruction

USB RECORDING
"Pausing" the time shift pro-
grammes
You can pause any programme you are watch-
ing. This is a useful function. For instance, if the
phone rings when you are watching a movie,
you can pause the movie and resume it after the
call without missing nothing.
The last scene that was frozen is displayed and
time shift is recorded into the external data
media.
In Timeshift mode, you can only record as much
as the free memory space you have set on the
external data medium.
Note:
Use an external USB Hard Disk for an
7
uninterrupted "Permanent Time Shift".
1 Press »
« during the broadcast.
!
– Television picture is paused and delay
time is displayed.
2 To resume the broadcast, press »
– The system continues recording the broad-
cast while you are watching it.
Note:
The following functions can be used in the
7
Time Shift mode.
– Fast rewind, press »
the desired speed;
– Fast forward, press »
the desired speed;
– To pause, press »
3 Press »
« to quit the Timeshift function.
7
4 To stop the timeshift, press »
»Yes«;
or
to continue the timeshift, press »
»No«.
38 / 81 EN
-------------------------------------------------------------------------------------------
«.
8
«several times for
3
« several times for
4
«.
!
<
« to select
>
« to select

Recording programmes

You can record a TV channel. Programmes are
recorded onto the external data media and the
archive is managed via television.
A memory of 44 MB up to 110 MB is required
for a 1 minute record.
Recording programs with one touch
1 Select the channel with »1...0« or »P+«,
»P–« and press »
– Recording information will be displayed:
Recording symbol, channel name, pro-
gramme time and recording time.
– These information will disappear after a
short time.
2 Press »
« to end recording.
7
3 To stop recording, press »
or
to continue the recording, press »
select »No«.
Notes:
When recording is complete, it will auto-
7
matically be stored on the external data
media.
If you remove the external data media
7
during recording, then the recording is
cancelled automatically and no data is
recorded onto the external data media.
Switching the TV to stand-by during
recording
1 Select the channel you want to record and
press » « to start recording.
2 To switch the TV to stand-by, press »
3 To continue recording and switch to stand-
<
by, press » «;
or
to end recording and switch the TV to stand-
>
by, press » «.
Television / User Manual
« to start recording.
<
« to select »Yes«;
>
« to
8
«.