Table of Contents
Advertisement
2.
Remove the nine Phillips M2.0 × 4.0 screws that secure the system board to the computer.
3.
Lift the right edge of the system board, and then pull the board up and to the right to remove it from the
computer (2).
To install the system board, reverse this procedure.
Touchpad
To remove the touchpad, use this procedure and illustration.
Table 6-11
Touchpad description and part number
Description
Touchpad, ceramic white
Touchpad, mica silver
Touchpad, performance blue
Touchpad cable
Before removing the touchpad, follow these steps:
54
Chapter 6 Removal and replacement procedures for authorized service provider parts
Spare part number
N13309-001
N13310-001
N13311-001
N13312-001
Advertisement
Table of Contents
