Using The Washer; Things To Know Before Using The Washer - LG Tromm FR46C5MCNH Owner's Manual

USING THE WASHER

Things to Know before Using the
Washer
Use Related
• LG Electronics washer models support the capacity
set forth in testing by KS. Depending on the type or
volume of laundry, the nominal capacity may differ
from the actual capacity.
• Do not exceed the laundry capacity. If greater than
the nominal capacity, then the product performance is
degraded and the product will be overloaded.
• The product performance or washing capacity is
determined by the electronic control program. So,
even if it uses the same type of washing bucket
and motor, a different model may exhibit different
performance or washing capacity.
• LG Electronics front load washer adopts the waterfall
method where laundry that has absorbed water falls
from the top to the bottom.
• LG Electronics front load washer uses a slight amount
of water to wash laundry, so the water surface may
not be visible during the washing process. But, even
so, laundry is sufficiently soaked in water and being
washed properly.
Checks before Using the Washer
• Is the water supply hose correctly connected to the
cold water side and the hot water side?
• Is the water faucet open?
• Is the power plug correctly inserted into the power
consent?
• Is the water drain hose placed correctly?
• Is the product leveled?
22
Using the Washer Door
Opening the Washer Door
• Method 1: Grab and pull the handle on the right side
of the washer door.
• Method 2: Press the 문열림 or 빨래추가 button. The
washer door will open.
Closing the Washer Door
• Push the right center of the washer door to the end.
CAUTION
• If you do not completely insert laundry into the
washing bucket (rubber packing), then the rubber
packing may get damaged and it can cause water
leakages.
• If the nominal washing capacity is exceeded, it can
cause damages to the product or laundry.
• Do not let your hands get stuck between the washer
door and the washer. It can cause injury.
• If the washer door glass is damaged, it can cause
injury. So, do not operate the washer but immediately
call the LG Electronics service center.
• If you forced the washer door to open, then it can
cause part damages and safety problems.
NOTE
• If there is too much laundry in the machine or if you
do not completely close the washer door, then door
locking can fail.
• If the product is operating or 문잠김 is displayed, then
you cannot open the washer door. If you want to open
the washer door, do not use excessive force, but
press the 문열림 or 빨래추가 button or 동작/일시정지
button. Make sure the washer has completely stopped
and then open the washer door after 문잠김 sign has
disappeared.
• When the display unit shows
warning sign, first close the washer door by completely
pushing it. After that, press the 동작/일시정지 button.
• If a blackout occurs during operation, then you may have
to wait for a while before you can open the washer door (If
you use boiling-washing or if you operate a drier model,
then a blackout during drying is very dangerous, so do
not ever open the washer door in this case).
, ,
or a