MCZ CURVE COMFORT AIR 8 M1 Installation Manual page 45

8-CONNECTIONS TO ADDITIONAL DEVICES
ELECTRICAL CONNECTION
First connect the power cable to the back of the stove and then to a wall socket.
The main switch must only be activated to switch the stove on; otherwise, it is advisable to keep it switched off.
It is recommended to disconnect the power cable when the stove is not used.
The cable must never come into contact with the smoke exhaust pipe or any other part of the stove.
STOVE POWER SUPPLY
After connecting the power cable to the back of the stove, turn the switch to (I) or ON.
The stove is then powered.
FUSE COMPARTMENT
There is a fuse box also in the switch block next to the power socket. Open this compartment by simply lifting the cover, using a screwdriver
as a lever from inside the power outlet compartment. Inside there are two fuses (3.15 A delayed), which may need to be replaced if the
stove is not powered (e.g. the ON/OFF button does not go on or the control panel display does not light up) - operation to be implemented
by an authorised and skilled technician.
Technical Dept. - All rights reserved - Reproduction is prohibited
ELECTRICAL STOVE CONNECTION
I/ON
STOVE SWITCH
STOVE POWER SUPPLY
43