MCZ CURVE COMFORT AIR 8 M1 Installation Manual page 30

5-CLADDING ASSEMBLY
HOW TO USE THE TEMPLATE TO SECURE THE TOP FRONT CERAMIC PANEL
After removing frame "T2" from the structure of the stove, in line with the instructions reported in the above paragraph, take template "M"
to position the ceramic panel and secure it at the top of frame "T2" with the screws supplied.
As described above, secure ceramic panel "B" to frame "T2" by ensuring that the top of the ceramic panel rests against template "M". After
mounting ceramic panel "B", remove template "M", which will be used for the other ceramic panels.
Secure the frame with the ceramic panel to the stove, as specified in the instructions.
M
T2
CERAMIC ADJUSTMENT FLAPS
28
M
M
B
T2
The frame of the ceramic panels is fitted with flaps ("P"), which
are required to ensure the ceramic parts remain in place and that
during operation they do not generate vibrations.
Try and mount the ceramic panels as described in these pages. If
the panel remains loose in relation to the frame, push out flaps
P
"P" so that they touch the ceramic surface, thereby ensuring the
ceramic panels remain fixed in place.
M
B