Cleaning Exterior Lamps/Lenses; Finish Care - Chevrolet Suburban 2007 Owner's Manual

Hide thumbs Also See for Suburban 2007:
Table of Contents

Advertisement

Cleaning Exterior Lamps/Lenses

Use only lukewarm or cold water, a soft cloth and
a car washing soap to clean exterior lamps
and lenses. Follow instructions under Washing
Your Vehicle on page 549.

Finish Care

Occasional waxing or mild polishing of your
vehicle by hand may be necessary to remove
residue from the paint finish. You can get
GM-approved cleaning products from your dealer.
See Vehicle Care/Appearance Materials on
page 554.
If your vehicle has a "basecoat/clearcoat" paint
finish, the clearcoat gives more depth and gloss to
the colored basecoat. Always use waxes and
polishes that are non-abrasive and made for a
basecoat/clearcoat paint finish.
Notice: Machine compounding or aggressive
polishing on a basecoat/clearcoat paint
finish may damage it. Use only non-abrasive
waxes and polishes that are made for a
basecoat/clearcoat paint finish on your vehicle.
550
Foreign materials such as calcium chloride and
other salts, ice melting agents, road oil and tar, tree
sap, bird droppings, chemicals from industrial
chimneys, etc., can damage your vehicle's finish if
they remain on painted surfaces. Wash the vehicle
as soon as possible. If necessary, use non-abrasive
cleaners that are marked safe for painted surfaces
to remove foreign matter.
Exterior painted surfaces are subject to aging,
weather and chemical fallout that can take their toll
over a period of years. You can help to keep
the paint finish looking new by keeping your
vehicle garaged or covered whenever possible.
Protecting Exterior Bright Metal Parts
Bright metal parts should be cleaned regularly to
keep their luster. Washing with water is all
that is usually needed. However, you may use
chrome polish on chrome or stainless steel trim,
if necessary.
Use special care with aluminum trim. To avoid
damaging protective trim, never use auto or
chrome polish, steam or caustic soap to clean
aluminum. A coating of wax, rubbed to high polish,
is recommended for all bright metal parts.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tahoe 2007

Table of Contents