Chevrolet Suburban 2007 Owner's Manual page 29

Returning the Seat(s) to the Sitting
Position
To return the seat to the sitting position, do the
following:
1. Pull the seat down until it latches to the floor.
The seatback cannot be raised if the seat is
not latched to the floor.
3. Lift the lever again
to release the rear
of the seat from
the floor. The seat
will tumble forward.
CAUTION:
{
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.
2. Lift the seatback and push it rearward. Push
and pull on the seatback to make sure it is
locked.
29