Table of Contents
Advertisement
6. Instruction for use
•
Configure the different working modes:
4. "PowerScheduling"configuration:
It is possible to program in advance the time intervals in
which we want the zeroCO
•
Enter the menu through the "Power Scheduling"
option available in "Working Mode Menu" then click
"
" icon to add time slots to the calendar.
•
Set the "Start Up" and "End Up" charging start time
and any periodic repetition with "Repeater". Save the
settings to confirm.
Note: For all operating modes, the minimum power
that can be set is 1,4 kW.
After arriving on the Homepage, you can access the settings via
the gear icon
from which you can then enter the "Working
Mode
2. " ConstantPowerMode"configuration:
Mode in which charging is carried out with a constant power
that can be set by the user and expressed in kW. The
maximum power that can be set is 7.3 kW
3. " PowerManagementMode"configuration:
Usable only in the presence of an electric meter, this mode
allows you to set the maximum power that can be absorbed
from the network and therefore charge the vehicle with the
available power. This makes it possible to never exceed a
certain absorption threshold by the entire system, adapting
the charging power to any other absorption present on the
network.
sun charger to charge.
2
. 51 .
Advertisement
Table of Contents
