Table of Contents
Advertisement
5. Installation and wiring
4. Unscrew 3 M3x8 screws on the base of the post (Figure 22), lift the cover and align it with
the installation holes before fixing the bottom bolts.
5. Close the cover and attach 3 M3x8 screws to complete the installation of the column (Figure
23).
6. Screw the 2 screw M4x16 screws into the two holes at the top of the column.
7. Refer to steps 4, 5 and 6 chapter "Wallbox installation on the wall" at page 36 to complete
the installation.
Figure 22
Figure 24
Figure 23
. 41 .
Advertisement
Table of Contents
