Table of Contents
Advertisement
5. Installation and wiring
6. After having carried out the wiring of the post it is necessary to set the micro switches
present in the single-phase (Figure 36) or three-phase (Figure 37) board as shown in the
following table:
Switch
Description
Current limitation
Not used
Not used
Plug & Charge
Current limitation
After connecting the plug
to the vehicle, the charge is
activated instantly
Figure 36
ON
to 16A.
charging is activated only by
OFF
Current limitation
to 32A.
Once the plug has been
connected to the vehicle,
APP or by RFID card
Figure 37
. 47 .
Advertisement
Table of Contents
