Automatic High Beam - If Equipped - Dodge DURANGO 2019 Quick Reference Manual

Rear Wiper Operation
The rear wiper/washer is operated by rotating a
switch, located on the middle of the lever.
Rain Sensing Wipers
This feature senses moisture on the windshield
and automatically activates the wipers for the
driver. The feature is especially useful for road
splash or overspray from the windshield washers
of the vehicle ahead. Rotate the end of the multi-
function lever to one of four settings to activate
this feature.
For further information, and applicable warnings
and cautions, please refer to the Owner's Manual
at www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Cana-
dian Residents).
L I G H T S
Automatic High Beam — If
Equipped
This system automatically controls the operation
of the headlamp high beams as oncoming vehicles
approach.
• The Automatic High Beam Headlamp Control
can be turned on or off using the Uconnect
System.
• Push the turn signal lever away from you.
• With the headlight switch in the "AUTO" posi-
tion, the high beams are controlled auto-
matically.
• Pull the turn signal lever toward you to manu-
ally deactivate the system.
• To improve system recognition of crossing traf-
fic, and to limit use in a residential area, the
vehicle must be moving at a speed greater than
20 mph (32 km/h) before the Automatic High
Beam Module (AHBM) begins requesting high
beam activation.
NOTE:
If the windshield or Automatic High Beam Head-
lamp Control mirror is replaced, the mirror must
be re-aimed to ensure proper performance. See an
local authorized dealer.
For further information, and applicable warnings
and cautions, please refer to the Owner's Manual
at www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Cana-
dian Residents).