Asus P8Z77-V PREMIUM Manual page 58

2. Intel Z77 Serial ATA 3.0 Gb/s connectors (7-pin SATA3G_34/5 [blue])
®
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical disc
drives via Serial ATA 3.0 Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
chipset.
•
•
•
•
1-40
Rapid Storage Technology through the onboard Intel
®
These connectors are set to [AHCI Mode] by default. If you intend to create a Serial
ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID
Mode]. Refer to section 3.5.3 SATA Configuration for details.
Before creating a RAID set, refer to section 5.1 RAID configurations or the manual
bundled in the motherboard support DVD.
When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section
3.5.3 SATA Configuration for details.
You must install Windows
®
ATA hard disk drives. The Serial ATA RAID feature is available only if you are using
Windows XP SP3 or later versions.
®
XP Service Pack 3 or later versions before using Serial
Chapter 1: Product introduction
Z77
®