Asus P8Z77-V User Manual

Asus P8Z77-V User Manual

Your next z77 build with blazing performance boosts, customizable fan controls and remote control functions over wi-fi
Hide thumbs Also See for P8Z77-V:
Table of Contents

Advertisement

P8Z77-V

Advertisement

Table of Contents
loading

Summary of Contents for Asus P8Z77-V

  • Page 1 P8Z77-V...
  • Page 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
  • Page 3: Table Of Contents

    Contents Contents ... iii Safety information ... vi About this guide ... vii P8Z77-V specifications summary ... ix Chapter 1: Product introduction Welcome! ... 1-1 Package contents... 1-1 Special features... 1-2 1.3.1 Product highlights... 1-2 1.3.2 Dual Intelligent Processors 3 with SMART DIGI+ Power Control 1-4 1.3.3...
  • Page 4: Contents

    USB Configuration ... 3-22 Onboard Devices Configuration ... 3-23 APM ... 3-26 Network stack... 3-27 ASUS EZ Flash 2 Utility ... 3-33 ASUS O.C. Profile ... 3-33 ASUS Update utility... 3-36 ASUS EZ Flash 2 utility ... 3-39 ASUS CrashFree BIOS 3 utility... 3-40 ASUS BIOS Updater ...
  • Page 5 Contents 4.3.6 Sensor Recorder ... 4-14 4.3.7 USB 3.0 Boost... 4-15 4.3.8 USB BIOS Flashback ... 4-16 4.3.9 ASUS Update ... 4-18 4.3.10 MyLogo2 ... 4-19 4.3.11 Audio configurations... 4-21 RAID configurations ... 4-22 4.4.1 RAID definitions ... 4-22 4.4.2 Installing Serial ATA hard disks ...
  • Page 6: Safety Information

    Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
  • Page 7: About This Guide

    Where to find more information Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer.
  • Page 8: Conventions Used In This Guide

    Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task.
  • Page 9: P8Z77-V Specifications Summary

    Turbo Boost Technology 2.0 ® * The Intel Turbo Boost Technology 2.0 support depends on the ® CPU types. ** Refer to www.asus.com for Intel CPU support list Intel Z77 Express Chipset ® 4 x DIMM, max. 32GB, DDR3 2400(O.C.)*/2200(O.C.)*/2133 (O.C.)/2000(O.C.)/1866(O.C.)/1600/1333/1066 MHz, non-ECC,...
  • Page 10 * The USB 3.0 ports only support Windows 7 or later versions. UASP standard only supports Windows 8. ASUS Dual Intelligent Processors 3 - New DIGI+ Power Control with Smart DIGI+: Smart DiGI+ : - Smart DIGI+ Key- quickly delivers higher VRM power for superior CPU/iGPU/DRAM overclocking performance.
  • Page 11 - AI Suite II - Anti Surge - MemOK! ASUS Quiet Thermal Solution: - ASUS Fan Xpert 2 featuring Fan Auto Tuning function for optimized speed control - ASUS Fanless Design: Heatsink solution ASUS EZ DIY: - ASUS USB BIOS Flashback with USB BIOS Flashback...
  • Page 12 - BCLK/PCIE frequency tuning from 80MHz up to 300MHz at 0.1MHz increment Overclocking Protection: - ASUS C.P.R.(CPU Parameter Recall) 1 x PS/2 keyboard/mouse combo Port 1 x WLAN connector for ASUS wireless module (Wi-Fi 802.11 b/g/n) 1 x DisplayPort 1 x HDMI port 1 x DVI-D port...
  • Page 13 *Specifications are subject to change without notice. 64 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.5, ACPI 2.0a, Multi-language BIOS, ASUS EZ Flash 2, ASUS CrashFree BIOS 3, F12 PrintScreen, F3 Shortcut Function and ASUS DRAM SPD (Serial Presence Detect) memory information WfM 2.0, DMI 2.0, WOL by PME, PXE, WOR by PME...
  • Page 15: Chapter 1: Product Introduction

    Thank you for buying an ASUS The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below.
  • Page 16: Special Features

    Quad-GPU SLI and Quad-GPU CrossFireX Support! Flexible Multi-GPU Solutions, Your Weapon of Choice! P8Z77-V brings you the multi-GPU choice of either SLI™ or CrossFireX. The motherboard features the most powerful Intel® Z77 platform to optimize PCIe allocation in multiple GPU configurations.
  • Page 17: Intel Smart Response Technology

    Complete USB 3.0 Integration ASUS facilitates the strategic USB 3.0 accessibility for both the front and rear panel – 6 USB 3.0 ports in total. Experience the latest plug & play connectivity at speeds up to 10 times faster than USB 2.0.
  • Page 18: Dual Intelligent Processors 3 With Smart Digi+ Power Control

    Get incredible performance increases with TPU and the all-new SMART DIGI+ Up to 85% boost in CPU frequency Always at the forefront of power design, ASUS propels you into the future standard of power management again by SMART DIGI+ Technology, which works with the TPU (TurboV Processing Unit) to give an exceptional increase in CPU overclocking performance.
  • Page 19: Asus Exclusive Features

    DLNA streaming so you can enjoy a home theater PC, while also providing remote access to your PC with a smart device. ASUS Wi-Fi GO! leads the market by integrating Wi-Fi connectivity, DLNA access and all smart devices with a one-stop utility for a futuristic connected lifestyle.
  • Page 20: Asus Quiet Thermal Solution

    Overall, it’s an intuitive network bandwidth control center. AI Suite II With its user-friendly interface, ASUS AI Suite II consolidates all the exclusive ASUS features into one simple to use software package. It allows users to supervise overclocking, energy management, fan speed control, voltage and sensor readings, and even interact with mobile devices via Wi-Fi.
  • Page 21: Asus Ez Diy

    ASUS EZ-Flash 2 ASUS EZ Flash 2 is a user-friendly utility that allows you to update the BIOS without using a bootable floppy disk or an OS-based utility.
  • Page 22: Other Special Features

    1.3.6 Other special features LucidLogix Virtu MVP LucidLogix Virtu MVP featuring HyperFormance™ Technology boosts your discrete graphics card up to 30% beyond its original performance. Designed for Intel processor graphics ® and Windows 7 PCs, it perfectly combines the performance of discrete graphics cards ®...
  • Page 23: Dts Connect

    The motherboard is European Union’s Energy-related Products (ErP) ready, and ErP requires products to meet certain energy efficiency requirement in regards to energy consumptions. This is in line with ASUS vision of creating environment-friendly and energy-efficient products through product design and innovation to reduce carbon footprint of the product and thus mitigate environmental impacts.
  • Page 24 Chapter 1: Product Introduction 1-10...
  • Page 25: Chapter 2: Hardware Information

    • • • • ASUS P8Z77-V Chapter 2 Unplug the power cord from the wall socket before touching any component. Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
  • Page 26: Motherboard Overview

    Motherboard overview 2.2.1 Motherboard layout Refer to 2.2.7 Internal connectors and 2.3.10 Rear panel connection for more information about rear panel connectors and internal connectors. Chapter 2: Hardware information...
  • Page 27: Layout Contents

    Clear CMOS USB 2.0 connectors (10-1 pin USB78, USB910, USB1112, USB1314) USB BIOS flashback button TPM connector (20-1 pin TPM) Front panel audio connector (10-1 pin AAFP) Digital audio connector (4-1 pin SPDIF_OUT) ASUS P8Z77-V Page 2-26 2-25 2-14 2-23 2-17...
  • Page 28: Central Processing Unit (Cpu)

    Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related.
  • Page 29: System Memory

    A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. Recommended memory configurations Install one memory module in slot A2 first as a single-channel operation. ASUS P8Z77-V...
  • Page 30: Memory Configurations

    • For system stability, use a more efficient memory cooling system to support a full memory load (4 DIMMs) or overclocking condition. P8Z77-V Motherboard Qualified Vendors Lists (QVL) DDR3 2400 (O.C.) MHz capability Vendors Part No. CORSAIR CMGTX8(XMP) G.Skill...
  • Page 31 AXA3ES4GK2000LG28V(XMP) 4GB (2x 2GB) Patriot PX7312G2000ELK(XMP) 12GB (3x 4GB) Patriot PV736G2000ELK(XMP) 6GB (3x 2GB) Silicon Power SP002GBLYU200S02(XMP) Team TXD32048M2000C9(XMP) Team TXD32048M2000C9-L(XMP) ASUS P8Z77-V Chip Chip Timing Brand 9-10-9-28 1.65 Kingmax N/A Size Chip Chip Timing Brand SS - 9-9-9-24 8GB (2x 4GB)
  • Page 32 DDR3 1866 MHz capability Vendors Part No. A-DATA AX3U1866GC2G9B(XMP) A-DATA AX3U1866GC4G9B(XMP) CORSAIR CMT32GX3M4X1866C9(XMP) 32GB (4x 8GB) DS CORSAIR CMZ8GX3M2A1866C9(XMP) G.SKILL F3-14900CL9Q-16GBXL(XMP) 16GB (4x 4GB) DS G.SKILL F3-14900CL9D-8GBSR(XMP) G.SKILL F3-14900CL9Q- 8GBFLD(XMP) Patriot PXD34G1866ELK(XMP) Patriot PXD38G1866ELK(XMP) DDR3 1800 MHz capability Vendors Part No. G.SKILL F3-14400CL9D-4GBRL(XMP) 4GB(2 x 2GB) DS DDR3 1600 MHz capability Vendors...
  • Page 33 4GB (2x 2GB) Patriot PVV38G1600LLK(XMP) 8GB (2x 4GB) Patriot PX538G1600LLK(XMP) 8GB (2x 4GB) SanMax SMD-4G68HP-16KZ Team TXD31024M1600C8-D(XMP) Team TXD32048M1600HC8-D(XMP) 2GB ASUS P8Z77-V Chip Chip NO. Timing Voltage DIMM socket support Brand 1.65 1.65 1.65 1.65 1.65 1.65 1.65 8-8-8 1.65...
  • Page 34 DDR3 1333 MHz capability Vendors Part No. A-DATA AD63I1B0823EV A-DATA AXDU1333GC2G9(XMP) A-DATA AD63I1C1624EV A-DATA SU3U1333W8G9(XMP) Apacer 78.A1GC6.9L1 Apacer 78.B1GDE.9L10C CORSAIR CMX8GX3M2A1333C9 (XMP) ELPIDA EBJ20UF8BCF0-DJ-F ELPIDA EBJ41UF8BCF0-DJ-F G.SKILL F3-10600CL9D-4GBNT G.SKILL F3-10666CL9D-8GBRL G.SKILL F3-10666CL9D-8GBXL GEIL GET316GB1333C9QC GEIL GG34GB1333C9DC GEIL GG34GB1333C9DC GEIL GB34GB1333C7DC GEIL GVP38GB1333C9DC Hynix...
  • Page 35 Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support. • Visit the ASUS website for the latest QVL. ASUS P8Z77-V Chip Chip NO.
  • Page 36: Expansion Slots

    2.2.4 Expansion slots Ensure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Slot No. Slot Description PCIe 2.0 x1_1 slot PCIe 3.0/2.0 x16_1 slot (single at x16 or dual at x8/x8 mode) PCIe 2.0 x1_2 slot PCI_1 slot PCIe 3.0/2.0 x16_2 slot (at x8 mode)
  • Page 37: Irq Assignments For This Motherboard

    PCI slot 2 Intel 82579V LAN USB2_1 Controller USB2_2 Controller shared Intel USB3.0 Controller shared ASMedia USB3.0 Controller Intel PCH SATA Controller ASMedias SATA Controller HD Audio Controller ASUS P8Z77-V – – – – shared – – – – –...
  • Page 38: Onboard Switches

    BIOS default settings. A messgae will appear during POST reminding you that the BIOS has been restored to its default settings. • We recommend that you download and update to the latest BIOS version from the ASUS website at www.asus.com after using the MemOK! function. 2-14 Chapter 2: Hardware information...
  • Page 39 You may use the TurboV and Auto Tuning feature in the TurboV EVO application, adjust the BIOS setup program, or enable the TPU switch at the same time. However, the system will use the last setting you have made. ASUS P8Z77-V 2-15...
  • Page 40 EPU switch Turning this switch to Enable will automatically detect the current PC loadings and intelligently moderate the power consumption. For ensuring the system performance, turn the switch setting to Enable when the system is powered off. • The EPU LED (O2LED2) near the EPU switch lights when the switch setting is turned to Enable.
  • Page 41: Onboard Leds

    ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. ASUS P8Z77-V 2-17...
  • Page 42 TPU LED The TPU LED lights when the TPU switch is turned to Enable. EPU LED The EPU LED lights when the EPU switch is turned to Enable. 2-18 Chapter 2: Hardware information...
  • Page 43: Jumper

    BIOS can automatically reset parameter settings to default values. • Due to the chipset behavior, AC power off is required to enable C.P.R. function. You must turn off and on the power supply or unplug and plug the power cord before rebooting the system. ASUS P8Z77-V 2-19...
  • Page 44: Internal Connectors

    2.2.8 Internal connectors Intel Z77 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1/2 [gray]) ® These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel chipset.
  • Page 45 ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows ® XP SP3 or later versions. ASUS P8Z77-V Rapid Storage Technology through the onboard Intel ® XP Service Pack 3 or later versions before using Serial ®...
  • Page 46 Asmedia Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_E1/E2 [navy blue]) ® These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. • The SATA6G_E1/E2 (navy blue) connectors are for data drives only. ATAPI device is not supported.
  • Page 47 Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. The S/PDIF module is purchased separately. ASUS P8Z77-V ® 7 or later versions. UASP standard only...
  • Page 48: Usb Connectors

    Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports.
  • Page 49 The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power. • All the CPU and CHA fans support ASUS Fan Xpert 2 feature. • If you install two VGA cards, we recommend that you plug the rear chassis fan cable to the motherboard connector labeled CHA_FAN1-3 for better thermal environment.
  • Page 50 Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. •...
  • Page 51 1000W power or above to ensure the system stability. • If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details. PSU Suggested List Model...
  • Page 52: System Panel Connector

    System panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
  • Page 53 This connector supports a Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity. TPM module is purchased separately. ASUS P8Z77-V 2-29...
  • Page 54: Building Your Computer System

    Building your computer system 2.3.1 Additional tools and components to build a PC system 1 bag of screws PC chassis Intel LGA 1155 CPU DIMM SATA optical disc drive (optional) The tools and components in the table above are not included in the motherboard package. 2-30 Philips (cross) screwdriver Power supply unit...
  • Page 55: Cpu Installation

    2.3.2 CPU installation The LGA1156 CPU is incompatible with the LGA1155 socket. DO NOT install a LGA1156 CPU on the LGA1155 socket. ASUS P8Z77-V 2-31...
  • Page 56 Chapter 2: Hardware information 2-32...
  • Page 57: Cpu Heatsink And Fan Assembly Installation

    2.3.3 CPU heatsink and fan assembly installation To install the CPU heatsink and fan assembly ASUS P8Z77-V Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary. 2-33...
  • Page 58 To uninstall the CPU heatsink and fan assembly Chapter 2: Hardware information 2-34...
  • Page 59: Dimm Installation

    2.3.4 DIMM installation To remove a DIMM ASUS P8Z77-V 2-35...
  • Page 60: Motherboard Installation

    2.3.5 Motherboard installation The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps remain the same. 2-36 Chapter 2: Hardware information...
  • Page 61 DO NOT overtighten the screws! Doing so can damage the motherboard. ASUS P8Z77-V 2-37...
  • Page 62: Atx Power Connection

    2.3.6 ATX Power connection Chapter 2: Hardware information 2-38...
  • Page 63: Sata Device Connection

    2.3.7 SATA device connection ASUS P8Z77-V 2-39...
  • Page 64: Front I/O Connector

    2.3.8 Front I/O Connector To install ASUS Q-Connector To install USB 2.0 Connector USB 2.0 To install USB 3.0 Connector USB 3.0 2-40 To install front panel audio connector AAFP Chapter 2: Hardware information...
  • Page 65: Expension Card Installation

    2.3.9 Expension Card installation To install PCIe x16 cards To install PCIe x1 cards To install PCI cards ASUS P8Z77-V 2-41...
  • Page 66: Usb Bios Flashback

    BIOS is automatically flashed using standby power. Worry-free overclocking for the ultimate convenience! Download the USB BIOS Flashback wizard from the ASUS service website (www.asus. com). Save it to a USB portable disk, and place it in the root directory.
  • Page 67: Rear Panel Connection

    6. USB 3.0 ports E1 and E2 (ASUS USB3.0 Boost UASP Mode) * The ASUS Wireless Module is individually installed. ** USB 3_12 supports Windows 7 operating system only. The bottom USB port supports USB Charger+ and USB BIOS Flashback.
  • Page 68 • This motherboard comes with multiple VGA output that features desktop extension on two monitors. You can connect two monitors to any two of the onboard VGA, DVI-D, HDMI and DisplayPort ports. • DVI-D can not be converted to output RGB signal to CRT and is not compatible with DVI-I.
  • Page 69 Click Display > General Settings and select a Resolution. Click Apply. Or you can click Display > General Settings > Scaling > Customize Aspect Ratio. Move the Horizontal Scaling and Vertical Scaling sliders and then click Apply. ASUS P8Z77-V 2-45...
  • Page 70: Audio I/O Connections

    2.3.12 Audio I/O connections Audio I/O ports Connect to Headphone and Mic Connect to Stereo Speakers Connect to 2.1 channel Speakers Chapter 2: Hardware information 2-46...
  • Page 71 Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Connect to 7.1 channel Speakers When the DTS UltraPC II function is enabled, ensure to connect the rear speaker to the gray port. ASUS P8Z77-V 2-47...
  • Page 72: Starting Up For The First Time

    Starting up for the first time After making all the connections, replace the system case cover. Be sure that all switches are off. Connect the power cord to the power connector at the back of the system chassis. Connect the power cord to a power outlet that is equipped with a surge protector. Turn on the devices in the following order: Monitor External SCSI devices (starting with the last device on the chain)
  • Page 73: Chapter 3: Bios Setup

    Chapter 3: Knowing BIOS The ASUS UEFI BIOS offers a user-friendly interface that goes beyond traditional keyboard-only BIOS controls to enable more flexible and convenient mouse input. Users can easily navigate the UEFI BIOS with the same smoothness as their operating system.
  • Page 74: Ez Mode

    Advanced Mode Normal mode Power Saving mode Selects the boot device priority Clicks to display all fan speeds if available Loads optimized default ASUS Optimal mode Chapter 3: BIOS setup...
  • Page 75: Advanced Mode

    Monitor fan settings. Boot For changing the system boot configuration Tool For configuring options for special functions Exit For selecting the exit options and loading default settings ASUS P8Z77-V Configuration fields Advanced Monitor Boot Enabled/Disabled Bluetooth Controller Enabled SPDIF Enabled...
  • Page 76: Menu Items

    Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have their respective menu items.
  • Page 77: Main Menu

    RTC RAM. The Administrator or User Password items on top of the screen show the default • Not Installed. After you set a password, these items show Installed. ASUS P8Z77-V Advanced Monitor Boot Choose the system default language...
  • Page 78: Administrator Password

    Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. To set an administrator password: Select the Administrator Password item and press <Enter>.
  • Page 79: Ai Tweaker Menu

    Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction. The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard. Scroll down to display the following items: ASUS P8Z77-V...
  • Page 80 Ai Overclock Tuner [Auto] Allows you to select the CPU overclocking options to achieve the desired CPU internal frequency. Select any of these preset overclocking configuration options: [Auto] Loads the optimal settings for the system. [Manual] Allows you to individually set overclocking parameters. [X.M.P.] If you install memory modules supporting the eXtreme Memory Profile (X.M.P.) Technology, choose this item to set the profiles supported by your...
  • Page 81: Dram Timing Control

    The sub-items in this menu allow you to set the CPU ratio and features. CPU Ratio [Auto] Allows you to manually adjust the maximum non-turbo CPU ratio. Use <+> and <-> keys to adjust the value. The valid value ranges vary according to your CPU model. ASUS P8Z77-V...
  • Page 82 Enhanced Intel SpeedStep Technology [Enabled] Allows you to enable or disable the Enhanced Intel [Disabled] Disables this function. [Enabled] The operating system dynamically adjusts the processor voltage and core frequency which may result in decreased average consumption and decreased average heat production. Turbo Mode [Enabled] Allows you to enable your core processor’s speed to run faster than the marked frequency in a specific condition.
  • Page 83 Allows you to configure the power response rate for CPU. Higher value for extreme overclocking. Configuration options: [Regular]: 100 [Medium]: 150 [High]:200 [Ultra High]: 250 iGPU Load-line Calibration [Auto] Allows you to set the iGPU Load-line Calibration. Configuration options: [Auto] [Regular] [High] [Extreme] ASUS P8Z77-V 3-11...
  • Page 84: Offset Mode Sign

    DRAM Power Phase Control [Auto] [Auto] Allows you to set the Auto mode. [Optimized] Allows you to set the ASUS optimized phase tuning profile. [Extreme] Allows you to set the full phase mode. DRAM Power Thermal Control [110] A higher temperature brings a wider DRAM power thermal range, and extends the overclocking tolerance to enlarge the O.C.
  • Page 85 The values of the CPU Manual Voltage, CPU Offset Voltage, DRAM Voltage, VCCSA Voltage, VCCIO Voltage, and PCH Voltage items are labeled in different color, indicating the risk levels of high voltage settings. • The system may need better cooling system to work stably under high voltage settings. ASUS P8Z77-V 3-13...
  • Page 86 Black CPU Manual 0.8V–1.22V Voltage CPU Offset 0.005V– Voltage 0.060V iGPU Offset 0.005V– Voltage 0.035V 1.20000V– DRAM Voltage 1.57500V 0.80000V– VCCSA Voltage 0.96875V 0.80000V– VCCIO Voltage 1.10000V 1.20000V– CPU PLL Voltage 1.88750V 0.80000V– PCH Voltage 1.10000V DRAM DATA REF Voltage on CHA [Auto] Allows you to set the DRAM DATA Reference Voltage on Channel A/B.
  • Page 87: Advanced Menu

    The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. ASUS P8Z77-V 3-15...
  • Page 88: Cpu Configuration

    3.5.1 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. The items shown in this screen may be different due to the CPU you installed. Use the scroll to display more items. Intel Adaptive Thermal Monitor [Enabled] [Enabled] Enables the overheated CPU to throttle its clock speed to cool down.
  • Page 89: Adjacent Cache Line Prefetch

    Intel Turbo Mode Technology. ® CPU C1E [Auto] [Enabled] Enables the C1E support function. This function must be enabled to enable or disable the Intel [Disabled] Disables the function. ASUS P8Z77-V SpeedStep Technology (EIST). ® Turbo Mode Technology. ® 3-17...
  • Page 90: Pch Configuration

    CPU C3 Report [Auto] Allows you to disable or enable the CPU C3 report to OS. CPU C6 Report [Auto] Allows you to disable or enable the CPU C6 report to OS. 3.5.2 PCH Configuration EFI BIOS Utility - Advanced Mode Main Ai Tweaker Back...
  • Page 91: Sata Configuration

    Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. [RAID] Set to [RAID] when you want to create a RAID configuration from the SATA hard disk drives. ASUS P8Z77-V 3-19...
  • Page 92: System Agent Configuration

    S.M.A.R.T. Status Check [Enabled] S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When read/write of your hard disk errors occur, this feature allows the hard disk to report warning messages during the POST. Configuration options: [Enabled] [Disabled] Hot Plug [Disabled] These items appear only when you set the SATA mode item to [AHCI Mode] or [RAID Mode], and allow you to enable/disable SATA Hot Plug Support.
  • Page 93: Nb Pcie Configuration

    Allows you to configure the NB PCI Express settings. PCIEX16_1 Link Speed [Auto] Allows you to configure the PCIEX16_1 speed. Configuration options: [Auto] [Gen1] [Gen2] PCIEX16_2 Link Speed [Auto] Allows you to configure the PCIEX16_2 speed. Configuration options: [Auto] [Gen1] [Gen2] ASUS P8Z77-V 3-21...
  • Page 94: Usb Configuration

    3.5.5 USB Configuration The items in this menu allow you to change the USB-related features. EFI BIOS Utility - Advanced Mode Ai Tweaker Main Back Advanced\ USB Configuration > USB Configuration USB Devices: 1 Keyboard, 1 Mouse, 2 Hubs Legacy USB Support Legacy USB3.0 Support Intel xHCI Mode EHCI Hand-off...
  • Page 95: Onboard Devices Configuration

    [HD] Sets the front panel audio connector (AAFP) mode to high definition audio. [AC97] Sets the front panel audio connector (AAFP) mode to legacy AC’97 ASUS P8Z77-V 3-23...
  • Page 96 Sets to [SPDIF] for SPDIF audio output. [HDMI] Sets to [HDMI] for HDMI audio output. Wi-Fi Controller [Enabled] [Enabled] The Wi-Fi function of ASUS Wi-Fi GO! card is enabled. [Disabled] The Wi-Fi function of ASUS Wi-Fi GO! card is disabled. VIA 1394 Controller [Enabled] [Enabled] Enables the onboard 1394 controller.
  • Page 97: Serial Port Configuration

    Serial Port [Enabled] Allows you to enable or disable the serial port (COM). Configuration options: [Enabled][Disabled] Change Settings [ IO=3F8h; IRQ=4 Allows you to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4][IO=2F8h; IRQ=3][IO=3E8h; IRQ=4][IO=2E8h; IRQ=3] ASUS P8Z77-V 3-25...
  • Page 98: Apm

    3.5.7 EFI BIOS Utility - Advanced Mode Main Ai Tweaker Back Advanced\ APM > ErP Ready Restore AC Power Loss Power On By PCI Power On By PCIE Power On By Ring Power On By RTC ErP Ready [Disabled] This item allows user to switch off some power at S5 to get the system ready for ErP requirement.
  • Page 99: Network Stack

    Ai Tweaker Advanced Monitor Boot Tool Back Advanced\ Network stack > Network stack Disabled Link Enable/Disable UEFI network stack Network stack [Disabled Link] This item allows user to enable/disable UEFI network stack function. Configuration options: [Disabled Link] [Enabled] ASUS P8Z77-V 3-27...
  • Page 100: Monitor Menu

    Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Scroll down to display the following items: Chapter 3: BIOS setup 3-28...
  • Page 101 Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. The values range from 20% to 100%. When the CPU temperature reaches the upper limit, the CPU fan will operate at the maximum duty cycle. CPU Lower Temperature [20] Displays the lower limit of the CPU temperature. ASUS P8Z77-V 3-29...
  • Page 102 CPU Fan Min. Duty Cycle(%) [20] Use the <+> and <-> keys to adjust the minimum CPU fan duty cycle. The values range from 0% to 100%. When the CPU temperature is under 40ºC, the CPU fan will operate at the minimum duty cycle.
  • Page 103: Boot Menu

    Full Screen Logo [Enabled] [Enabled] Enables the full screen logo display feature. [Disabled] Disables the full screen logo display feature. Set this item to [Enabled] to use the ASUS MyLogo 2™ feature. Wait For ‘F1’ If Error [Enabled] [Disabled] Disables this function. [Enabled] The system waits for the <F1>...
  • Page 104: Boot Option Priorities

    • To select the boot device during system startup, press <F8> when ASUS Logo appears. • To access Windows OS in Safe Mode, do any of the following: - Press <F5>...
  • Page 105: Tools Menu

    3.8.1 ASUS EZ Flash 2 Utility Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to confirm your choice.
  • Page 106 Save to Profile Allows you to save the current BIOS settings to the BIOS Flash, and create a profile. Key in a profile number from one to eight, press <Enter>, and then select Yes. Load from Profile Allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile number that saved your BIOS settings, press <Enter>, and then select Yes.
  • Page 107: Exit Menu

    Load Optimized Defaults Save Changes & Reset Discard Changes & Exit ASUS EZ Mode Launch EFI Shell from filesystem device Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus.
  • Page 108: Updating Bios

    Refer to the corresponding sections for details on these utilities. 3.10.1 ASUS Update utility The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows environment. The ASUS Update utility allows you to: ®...
  • Page 109: Updating The Bios Through The Internet

    Updating the BIOS through the Internet To update the BIOS through the Internet: From the ASUS Update screen, select Update BIOS from Internet, and then click Next. Select the ASUS FTP site nearest you to avoid network traffic. If you want to enable the BIOS...
  • Page 110: Updating The Bios Through A Bios File

    The screenshots in this section are for reference only. The actual BIOS information vary by models. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. 3-38 Chapter 3: BIOS setup...
  • Page 111: Asus Ez Flash 2 Utility

    3.10.2 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to use a bootable floppy disk or an OS-based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com.
  • Page 112: Asus Crashfree Bios 3 Utility

    The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at support.asus.com and save it to a USB flash drive.
  • Page 113: Asus Bios Updater

    3.10.4 ASUS BIOS Updater The ASUS BIOS Updater allows you to update BIOS in DOS environment. This utility also allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or gets corrupted during the updating process.
  • Page 114: Updating The Bios File

    To update the BIOS file using BIOS Updater At the FreeDOS prompt, type bupdater /pc /g and press <Enter>. D:\>bupdater /pc /g The BIOS Updater screen appears as below. ASUSTek BIOS Updater for DOS V1.30 [2011/12/22] Current ROM BOARD: P8Z77-V VER: 0204 DATE: 01/01/2012 PATH: P8Z77VD.CAP...
  • Page 115: Chapter 4: Software Support

    The contents of the support DVD are subject to change at any time without notice. Visit the ASUS website at www.asus.com for updates. 4.2.1 Running the support DVD Place the support DVD into the optical drive.
  • Page 116: Obtaining The Software Manuals

    The software manual files are in Portable Document Format (PDF). Install the Adobe Acrobat Reader from the Utilities menu before opening the files. ® Click the Manual tab. Click ASUS Motherboard Utility Guide from the manual list on the left. The Manual folder of the support DVD appears.
  • Page 117: Software Information

    4.3.1 AI Suite II AI Suite II is an all-in-one interface that integrates several ASUS utilities and allows users to launch and operate these utilities simultaneously. Installing AI Suite II To install AI Suite II on your computer Place the support DVD to the optical drive.
  • Page 118: Turbov Evo

    After installing AI Suite II from the motherboard support DVD, launch TurboV EVO by clicking Tool > TurboV EVO on the AI Suite II main menu bar. Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration.
  • Page 119 TurboV. Refer to Chapter 3 of your motherboard user manual for details. • The CPU Ratio bars show the status of the CPU cores, which vary with your CPU model. ASUS P8Z77-V PRO Voltage Adjustment bars Undoes all changes...
  • Page 120: Auto Tuning

    • Every CPU Strap support is subject to the physical characteristics of individual CPUs. Auto Tuning ASUS TurboV EVO includes two auto tuning modes, providing the most flexible auto-tuning options. • The overclocking result varies with the CPU model and the system configuration.
  • Page 121 Click Stop if you want to cancel the Overclocking process. TurboV automatically adjusts and saves BIOS settings and restarts the system. After re-entering Windows, a message appears indicating auto tuning success. Click OK to exit. ASUS P8Z77-V PRO...
  • Page 122: Digi+ Power Control

    4.3.3 DIGI+ Power Control DIGI+ PowerControl allows you to adjust the VRM voltage and frequency modulation to enhance reliability and stability. It also provides profile settings to achieve the highest power efficiency, generating less heat to prolong component lifespan, and minimize power loss. After installing AI Suite II from the motherboard support DVD, launch DIGI+ Power Control by clicking Tool >...
  • Page 123 A higher value setting gets higher VRM power consumption delivery. CPU Voltage Frequency Switching frequency will affect the VRM transient response and component thermal. Higher frequency gets quicker transient response. ASUS P8Z77-V PRO Application aids Apply all changes immediately Undo all changes...
  • Page 124 Function no. Function description iGPU Load-line Calibration Load-line is defined by Intel VRM specifications, and affects the iGPU voltage. The iGPU working voltage decreases proportionally to integrated graphics loading. A higher value can get a higher iGPU voltage, and a good performance, but decreases the CPU and VRM thermal conditions.
  • Page 125 OC Range. DRAM Power Phase Control Select Extreme for full phase mode to increase system performance or select Optimized for ASUS optimized phase tuning profile to increase DRAM power efficiency. DRAM Power Thermal Control A higher temperature brings a wider DRAM power thermal range, and extends the overclocking tolerance to enlarge overclocking potential.
  • Page 126: Epu

    Select From the Last Reset to show the total CO2 that has been reduced since you click the Clear button • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. 4-12...
  • Page 127: Probe Ii

    Saves your configuration Loads your saved configuration Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ASUS P8Z77-V PRO Loads the default Applies your...
  • Page 128: Sensor Recorder

    4.3.6 Sensor Recorder Sensor Recorder monitors the changes in the system voltage, temperature, and fan speed on a timeline. The History Record function allows you to designate specific time spans on record to keep track of the three system statuses for certain purposes. Launching Sensor Recorder After installing AI Suite II from the motherboard support DVD, launch Sensor Recorder by clicking Tool >...
  • Page 129: Usb 3.0 Boost

    4.3.7 USB 3.0 Boost The ASUS exclusive USB 3.0 Boost provides speed boost for USB 3.0 devices and the up-to-date support of USB Attached SCSI Protocol (UASP). With USB 3.0 Boost, you can accelerate the transfer speed of your USB 3.0 devices with ease.
  • Page 130: Usb Bios Flashback

    USB BIOS Flashback This utility allows you to check and save the latest BIOS version to a USB storage device. With ASUS USB BIOS Flashback hardware feature, the system BIOS is conveniently updated without booting your system. Sets the schedule...
  • Page 131 USB flashdrive, and click Download. After the download is complete, click OK. After you download the BIOS file to your flash drive, you can update the motherboard’s BIOS. Refer to 2.3.11 USB BIOS Flashback for details. ASUS P8Z77-V PRO 4-17...
  • Page 132: Asus Update

    4.3.9 ASUS Update ASUS Update lays out the options for updating BIOS on your system. Update BIOS utility on your system or simply save the utility for later use just by following the directions on this convenient updating feature. Launching ASUS Update After installing AI Suite II from the motherboard support DVD, launch ASUS Update by clicking Update>...
  • Page 133: Mylogo2

    Select the way you would like to do update your boot logo. Then click Next and follow the given instructions. Change the BIOS boot logo of my motherboard Under Current BIOS, click Browse and choose the desired image for your boot logo. Then click on Next. ASUS P8Z77-V PRO 4-19...
  • Page 134 Click on Auto Tune to adjust image size compatibility or adjust the resolution bar. You can click on Booting Preview to preview the boot image. Then click Next. Click on Flash to start updating the image to the boot logo. Click on Yes to reboot or you can also see the new logo next time you restart your computer.
  • Page 135: Audio Configurations

    Configuration options Control settings window Information button • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. • Due to Intel Z77 platform does not support Windows ® driver is only supported by Windows •...
  • Page 136: Raid Configurations

    RAID configurations The motherboard supports the following SATA RAID solutions: Intel Rapid Storage Technology with RAID 0, RAID 1, RAID 10 and RAID 5 support. • ® Mavell RAID utility with RAID 0 and RAID 1 support. • ® • You must install Windows ATA hard disk drives.
  • Page 137: Installing Serial Ata Hard Disks

    3. Reset Disks to Non-RAID RAID Volumes: None defined. Physical Devices: Port Device Model ST3160812AS ST3160812AS ST3160812AS ST3160812AS [↑↓]-Select ASUS P8Z77-V PRO All Rights Reserved. MAIN MENU 4. Recovery Volume Options 5. Acceleration Options 6. Exit DISK/VOLUME INFORMATION Serial # Size Type/Status(Vol ID) 9LS0HJA4 149.0GB...
  • Page 138: Creating A Raid Set

    The navigation keys at the bottom of the screen allow you to move through the menus and select the menu options. The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. The utility supports maximum four hard disk drives for RAID configuration.
  • Page 139 WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST. Are you sure you want to create this volume? (Y/N): Press <Y> to create the RAID volume and return to the main menu, or <N> to go back to the CREATE VOLUME menu. ASUS P8Z77-V PRO 4-25...
  • Page 140: Deleting A Raid Set

    Deleting a RAID set Take caution when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set. To delete a RAID set: From the utility main menu, select 2. Delete RAID Volume and press <Enter>. The following screen appears: Intel(R) Rapid Storage Technology - Option ROM - v10.5.1.1070 Copyright(C) 2003-10 Intel Corporation.
  • Page 141: Introduction To Intel ® 2012 Desktop Responsiveness

    Rapid Start Technology, DRAM size smaller than 8GB is ® required. Ensure to enable the acceleration of Intel creating the partition for the Intel ASUS P8Z77-V PRO 2012 Desktop responsiveness ® 2012 Desktop responsiveness ® 2012 Desktop responsiveness, you must ®...
  • Page 142 SSD Capacity Requirements SSD Partition Capacity Requirements Intel Rapid Start ® Intel Smart Response ® Intel Smart Response ® Intel Rapid Start ® Intel Smart Response, ® Intel Rapid Start, ® Intel Smart Connect ® • The SSD used for Intel creating RAID.
  • Page 143: Intel ® Smart Response Technology

    SSD and HDD at the same time. Maximized mode: WRITE BACK, write to SSD and write back to HDD in a later time. ASUS P8Z77-V PRO Smart Response Technology, setting the SATA Mode BIOS item to Rapid Storage Technology Driver software. ® 4-29...
  • Page 144: Intel ® Rapid Start Technology

    Select Disable Acceleration to disable this function, and select Change Mode to switch acceleration mode to Enhanced/ Maximized. • To enable Intel a HDD, and only one SSD can be assigned for caching. • If you want to restore the OS, go to BIOS Option ROM > Acceleration Options and remove the Disks/Volume Acceleration to disable Intel Refer to Chapter 4, section Installing Serial ATA hard disk for the entry of BIOS Option ROM.
  • Page 145 (1GB = 1024MB). Click Shrink. Go to Start> Control Panel> System and Security> System, and check the DRAM size information. The unallocated volume is allocated to the selected disk. ASUS P8Z77-V PRO Smart Response to allow enough capacity for the ® ® 4-31...
  • Page 146 To launch the disk partitioning tool, click Start > Programs > Accessories > Command Prompt tool. Type diskpart and press Enter. In the diskpart prompt, type list disk after DISKPART, and press Enter. Select the disk with the unallocated volume by typing select disk x (x = disk number), and press Enter.
  • Page 147 ® Click the Show hidden icons arrow from the right side of the task bar, and click Intel Technology Manager icon. ASUS P8Z77-V PRO Rapid Start Technology is incomplete if the computer is not rebooted, Rapid Start Technology. ® Rapid Start Technology under the ®...
  • Page 148: Recovering The Partition

    Tick On in the Status field to enable the function, and click Save. Click to enable or disable battery saving mode. This function only applies to notebooks. Click to enable or disable the timer. When enabled, move the scroll bar to the desired time. When the system is idle for more than the time period you set, the system automatically goes into the Intel Default time is 10 minutes.
  • Page 149 In the desktop, click Start, right-click Computer, and click Manage. In the Computer Management window, click Disk Management, right-click the shrinked new volume, and select Extend Volume. As the Extend Volume Wizard appears, click Next. ASUS P8Z77-V PRO 4-35...
  • Page 150: Intel ® Smart Connect Technology

    Click Next after selecting the default selected disk. Extend volume setup is completed. Click Finish to recover the Intel Rapid Start Technology partition. Reboot the system after deleting the partition. Go to Start > Control Panel > Programs > Programs and Features > to remove the Intel Rapid Start Manager for the complete deletion of Intel Rapid Start Technology.
  • Page 151: Using The Intel ® Smart Connect Technology

    When the scroll bar is activated, adjust the waking up time period for Internet data update. ASUS P8Z77-V PRO Smart Connect Technology. ® Click to view version information and help topics When updating is enabled, click to reset all settings to default.
  • Page 152 To disable the updating function, click Disable Updating. Clicking this button automatically disables the configuration in the Advanced tab. To reset to defaults, click Reset All to Defaults. In the Advanced tab, set up the schedule during low power usage time period for power saving.
  • Page 153: Creating A Raid Driver Disk

    Go to the Make Disk menu, and then click Intel AHCI/RAID Driver Disk to create a RAID driver disk. Select USB floppy disk drive as the destination disk. Follow the succeeding screen instructions to complete the process. Write-protect the floppy disk to avoid a computer virus infection. ASUS P8Z77-V PRO ® ® ® operating system ®...
  • Page 154: Installing The Raid Driver During Windows ® Os Installation

    4.5.3 Installing the RAID driver during Windows To install the RAID driver in Windows During the OS installation, the system prompts you to press the F6 key to install third- party SCSI or RAID driver. Press <F6>, and then insert the floppy disk with RAID driver into the USB floppy disk drive. When prompted to select the SCSI adapter to install, select the RAID driver for the corresponding OS version.
  • Page 155: Using A Usb Floppy Disk Drive

    Product ID (PID) are displayed. Browse the contents of the RAID driver disk to locate the file txtsetup.oem. Double-click the file. A window appears, allowing you to select the program for opening the oem file. ASUS P8Z77-V PRO 4-41...
  • Page 156 Use Notepad to open the file. Find the [HardwareIds.scsi.iaAHCI_DesktopWorkstationServer] and [HardwareIds.scsi.iaStor_DesktopWorkstationServer] sections in the txtsetup.oem file. Type the following line to the bottom of the two sections: id = “USB\VID_xxxx&PID_xxxx”, “usbstor” [HardwareIds.scsi.iaAHCI_DesktopWorkstationServer] id= “PCI\VEN_8086&DEV_1C02&CC_0106”,”iaStor” id= “USB\VID_03EE&PID_6901”, “usbstor” [HardwareIds.scsi.iaStor_DesktopWorkstationServer] id= “PCI\VEN_8086&DEV_2822&CC_0104”,”iaStor” id= “USB\VID_03EE&PID_6901”, “usbstor”...
  • Page 157: Chapter 5: Multiple Gpu Technology Support

    For Windows Vista, go to Control Panel > Programs and Features. Select your current graphics card driver/s. For Windows XP, select Add/Remove. For Windows Vista, select Uninstall. Turn off your computer. ASUS P8Z77-V Chapter 5 CrossFireX™ technology that allows you to install ® Multiple GPU technology support certified.
  • Page 158: Installing Two Crossfirex™ Graphics Cards

    5.1.3 Installing two CrossFireX™ graphics cards The following pictures are for reference only. The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same. Prepare two CrossFireX-ready graphics cards. Insert the two graphics card into the PCIEX16 slots.
  • Page 159: Installing The Device Drivers

    Configure. From the Graphics Adapter list, select the graphics card to act as the display GPU. Select Enable CrossFireX. Click Apply, and then click OK to exit the window. ASUS P8Z77-V CrossFireX™ technology ® desktop and select ® CrossFireX™ ®...
  • Page 160: Nvidia ® Sli™ Technology

    NVIDIA The motherboard supports the NVIDIA allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section. 5.2.1 Requirements • In SLI mode, you should have two identical SLI-ready graphics cards that are NVIDIA certified.
  • Page 161: Installing The Device Drivers

    You can launch the NVIDIA Control Panel by the following two methods. Right click on the empty space of the Windows and select NVIDIA Control Panel. The NVIDIA Control Panel window appears (See Step B5). ASUS P8Z77-V SLI bridge SLI™ technology ®...
  • Page 162 If you cannot see the NVIDIA Control Panel item in step (A), select Personalize. From the Personalization window, select Display Settings. From the Display Settings dialog box, click Advanced Settings. Chapter 5: Multiple GPU technology support...
  • Page 163 Start the NVIDIA Control Panel. The NVIDIA Control Panel window appears. Enabling SLI settings From the NVIDIA Control Panel window, select Set SLI Configuration. Click Enable SLI and set the display for viewing SLI rendered content. When done, click Apply. ASUS P8Z77-V...
  • Page 164: Lucidlogix Virtu Mvp

    Installing LucidLogix Virtu MVP To install LucidLogix Virtu MVP: Insert the support DVD in the optical drive. The ASUS Support Wizard appears if your computer has enabled the Autorun feature. Click the Utilites tab, then click LucidLogix Virtu MVP Software.
  • Page 165: Setting Up Your Display

    3D gaming performance. i-Mode (VGA output from motherboard) The motherboard’s IO ports and discrete graphic card is for reference only and may vary in different models. ASUS P8Z77-V d-Mode (VGA output from discrete graphics card)
  • Page 166: Configuring Lucidlogix Virtu Mvp

    5.3.3 Configuring LucidLogix Virtu MVP Launch the Virtu MVP Control Panel to allow you to configure the main features, adjust the performance settings and select applications for graphical virtualization. To open the control panel, right-click LucidLogix Virtu MVP icon in the notification area and select Open Virtu MVP Control Panel.
  • Page 167 Performance Allows you to turn ON/OFF the Hyperformance or Virtual Vsync function. ® Click to turn Hyperformance® ON or OFF Click to turn Virtual Vsync ON or OFF ASUS P8Z77-V 5-11...
  • Page 168 Applications Allows you to select applications for graphic virtualization. Click to select a program to run by discrete card, iGPU, or Hyperformance Click to add, edit, or remove programs See the descriptions of these columns below: • D column allows you to run applications with the discrete graphic card. Select D to enable 3D graphical performance for that application.
  • Page 169: Appendices

    Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas provoquer d’interférences et (2) cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité de l’appareil. ASUS P8Z77-V Appendices...
  • Page 170: Canadian Department Of Communications Statement

    ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different...
  • Page 171: Asus Contact Information

    ASUS COMPUTER INTERNATIONAL (America) Address Telephone Web site Technical Support Telephone Support fax Online support ASUS COMPUTER GmbH (Germany and Austria) Address Web site Online contact Technical Support Telephone Support Fax Online support * EUR 0.14/minute from a German fixed landline; EUR 0.42/minute from a mobile phone.
  • Page 172 Appendices...
  • Page 173 ASUS COMPUTER INTERNATIONAL (America) Address Telephone Web site Technical Support Telephone Support fax Online support ASUS COMPUTER GmbH (Germany and Austria) Address Web site Online contact Technical Support Telephone Support Fax Online support * EUR 0.14/minute from a German fixed landline; EUR 0.42/minute from a mobile phone.

This manual is also suitable for:

90-mibhz0-g0eay0dz

Table of Contents