Asus P8Z77-V PREMIUM Manual page 102

CPU Power Duty Control [T.Probe]
DIGI + VRM Duty Control adjusts the current and thermal conditions of every component's
phase.
[T. Probe]
[Extreme]
CPU Current Capability [100%]
Allows you to configure the total power range, and extends the overclocking frequency range
simultaneously. Configuration options: [100%] [110%] [120%] [130%] [140%]
Choose a higher value when overclocking, or under a high CPU loading for extra power
support.
CPU Power Thermal Control [130]
A higher temperature brings a wider CPU power thermal range and extends the overclocking
tolerance to enlarge the O.C. potential. Use the <+> and <-> keys to adjust the value. The
values range from 130 to 151.
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Power Response Control [Auto]
The DIG+ VRM controller provides a faster, and precise power response rate for the CPU.
Apply a higher value for an extreme overclocking.
Configuration options: [Auto] [Regular: 100%] [Medium: 150%] [Fast: 200%] [Ultra Fast:
250%]
The actual performance boost may vary depending on your CPU configuration.
iGPU Load-line Calibration [Auto]
Load-line is defined by Intel VRM specifications and affects the iGPU voltage. The iGPU
working voltage decreases to integrate graphics loading. A higher value gets a higher CPU
voltage and great performance but increases the CPU and thermal conditions.
Configuration options: [Auto] [Regular] [High] [Extreme]
The actual performance boost may vary depending on your CPU specification.
3-16
Select to maintain the VRM thermal balance.
Select to maintain the current VRM balance.
Chapter 3: BIOS setup