Saving Radio Stations To The Memory; Docking An Ipod & Playing An Ipod - iLive IHT3807DT Quick Start Manual

Saving Radio Stations to the Memory

Step 1:
Press the Source Button consecutively to select the FM or AM radio
mode.
Step 2:
Tune to the desired station using the Navigation Buttons on the unit or
the Tune Button on the remote.
Step 3:
Press the Menu Button on the unit or the Memory Button on the remote
control.
Step 4:
Press the Navigation Buttons to select a preset to save the current station
under.
Step 5:
After the preset has been selected press the Menu Button. The current
radio frequency is now saved to the selected preset number.
• There are 20 FM and 10 AM memory presets on this unit.
Docking an iPod
Step 1:
Locate the numbered bracket that fits the iPod that will be docked.
• Each included bracket has a number on it, indicating which iPod model
that bracket is compatible with. See the separate bracket chart page to
identify which bracket is needed.
Step 2:
Snap the bracket into place over the iPod connector in the Dock for iPod.
• All brackets will only fit one way onto the Dock for iPod.
• When inserting an iPod nano (first or second generation), slide the
Dock Connection on the unit so that it matches the opening on the iPod
nano.
Step 3:
Connect the iPod to the iPod connector inside the Dock for iPod.
Step 4:
Once an iPod is connected to the Dock for iPod, the unit will charge the
iPod.
Playing an iPod
Step 1:
Press the Power Button to turn the unit on.
Step 2:
Press the iPod Drawer Button to open the motorized Dock for iPod.
Step 3:
Press the Source Button to switch the unit to iPod mode.
Step 4:
Press the Play/Pause Button to begin playing the docked iPod.
7