Hoover NEXTRA HNS 9125 INTERACT 3D User Instructions page 20

Useful advice for users
Tips on using your domestic appliance in the most environmentally-friendly and economical way
Do a full load in your washing machine
To prevent any possible waste of energy, water or detergent we recommend that you
put a full load in your washing machine, not exceed the maximum load size.
Save up to 50% energy by washing a full load instead of 2 half loads.
When is prewashing really needed?
Only with particularly dirty loads! Energy savings of 5 to 15% are made by not selecting the
prewash option for normally soiled laundry.
Which wash temperature should you choose?
Using stain removers before machine washing reduces the need to wash at temperatures
over 60°C. Energy savings of up to 50% can be made by using a 60°C wash temperature.
38
When using your new Hoover Inter@ct for the first time
This machine will operate prior to programming the Inter@ct set up. However, this machine
has Start Delay and Programme End functions and for these functions to work efficiently the
inter@ct set must be programmed. This is a simple operation and special care has been
taken during manufacture to ensure that the user can operate this machine simply and
effectively.
Programming the machine
Inter@ct needs to be programmed so that the correct clock setting, language and personal
requirements are set. When the machine is turned on and the programme dial is moved away
from the "off" position to the programme selections a welcome message will appear.
This message is displayed for a short time while the machine recognises which programme
has been selected. When the machine is ready, the programme details will appear on the
display and from here you may now beging programming the machine.
Example
BAWE¸NA BIA¸A
12
INTENSYWNE
Enter the Menu
Prior to entering the inter@ct menu please note you have 30 seconds per operation to make
your selection. Should you run out of time the display will return to the start screen, and you
simply have to re-enter the inter@ct menu at continue with the programming.
From this stage the menu can be programmed. Hold down the "Start delay"
"Extra Rinse" buttons together for 5 seconds or until the beep sounds.
The menu options can be changed by pressing the "Extra Rinse"
To confirm and enter an option press the "Start delay"
Setting the language
Your washing machine is automatically set to Polish. If you require another language (it is this
language you will read when utilising the machine) follow this procedure:
Hold down the "Start delay" and the "Extra Rinse"
until the beep sounds to enter the Menu selection the display will then ask you to choose the
desired language.
Release the "Extra Rinse" and "Start delay"
language options by pressing the "Extra Rinse"
your choice.
WITAJ!
00.00
90
and the
button.
button.
(default setting - POLISH)
buttons together for 5 seconds or
buttons and scroll through the
button until you reach the language of
39