Sharp MX-B402 Start Manual page 29

• For users of Mac OS 9.0 to 9.2.2/X10.2.8/X10.3.9
The CD-ROM does not include software for Mac OS 9.0 to
9.2.2/X10.2.8/X10.3.9.
Contact your dealer or nearest authorized service representative if you want
software.
• For users of Windows 2000/XP/Server 2003/Vista/Server 2008/7
To perform the procedures described in this manual such as installing the
software and configuring settings after installation, administrator authority is
required.
SOFTWARE REQUIREMENTS
The following requirements must be met to use the software described in this manual.
Operating
system
environment*
Windows
Macintosh
*1 For the types of computers and operating systems that can run the software, see
"SYSTEM REQUIREMENTS" (page 26).
*2 When the Internet fax expansion kit is installed, the PC-Fax driver can be updated
using the "PRINTER UTILITIES" CD-ROM to enable the driver to be used as a
PC-I-Fax driver. In this case, the driver can be used without the facsimile expansion
kit.
*3 The scanner driver and Printer Status Monitor cannot be used on an IPv6-only
network.
Software
1
PCL6 printer driver,
PCL5e printer driver
PS printer driver,
PPD driver
PC-Fax driver
Scanner driver
Printer Status
Monitor
Macintosh PPD file
BEFORE INSTALLING THE SOFTWARE
Required
expansion kits
Can be used in
the standard
configuration.
Facsimile
2
expansion kit*
Can be used in
the standard
configuration.
Type of
1
connection*
Network/ USB
3
Network only*
(cannot be used
with a USB
connection)
27