LG ProBeam BU70QGA.AUS Owner's Manual page 24

24
4
Set the blending quality. ([Blending Quality Settings])
1. Adjust the [Brightness Level].
•
Adjust the brightness of the projector by adjusting [Brightness Level].
2. Adjust the [White Balance].
Menu
[Menu Position]
[Picture Mode]
[White Pattern]
[Color Temperature]
R-Gain, G-Gain,
B-Gain
• Set the menu position at the desired position.
• Set the image mode according to the situation.
• Set the white pattern.
• Adjust the color temperature.
•
Adjust the R, G, and B gain.
3. Adjust the [Color Uniformity].
• Select the desired place among the 15 areas.
• Set the menu position at the desired position.
• Adjust [Red], [Green], and [Blue] to fit [Color Uniformity].
4. Adjust the [Black Level].
• Adjust the projector black level of the non-overlapping/overlapping/
border area with the black level adjustment.
Function
Select the position of the Settings menu.
(Upper right end, lower right end, upper left end,
lower left end)
Select the image mode among Shopping Mall/QSR,
General, Transportation, Education, Government/
Enterprise, and Color Adjustment.
Set it to On and display the white pattern. (80IRE,
100IRE)
Adjust the color temperature.
Adjust the colors of red, green, and blue,
respectively.