Communication Parameter - LG ProBeam BU70QGA.AUS Owner's Manual

58

Communication Parameter

• Baud Rate: 9600 bps
• Data Length: 8 bits
• Parity Bit: None
• Stop Bit: 1 bit
• Flow Control: None
• Communication Code: ASCII code
NOTE
• When using 3-wire connections (non-standard), an IR daisy chain cannot be used.
• Be sure to only use the provided gender to connect properly.
• When you have daisy-chained multiple Projector products to control them simultaneously, if you attempt to turn
on/off the master device in a continuous manner, some products may not turn on. In this case, you can turn those
Projectors on by pressing the Projector
(Power)
BACK TILE EXIT
ID
ON OFF
button, not the Power button.