9. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
10. Do one of the following:
• If there are no gaps, select O.
• If there are gaps or the pattern is faint, select X and continue with the next step.
11. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the
process if necessary.
Caution: Never turn off the product or open the front cover during a cleaning cycle or you may not
be able to print.
If you don't see any improvement after cleaning the print head twice, turn off the product and wait at least
6 hours. Then run a nozzle check and try cleaning the print head again. If quality still does not improve,
run a Power Cleaning.
Parent topic:
Print Head Cleaning
Related concepts
Print Head Nozzle Check
264