Figure 2-9. Device Monitor And Control Window; Figure 2-10. Global Control Section - Texas Instruments TAS6424R-Q1 User Manual

Software Overview
2.5.2 TAS6424R-Q1 Settings on Device Monitor and Control Window
The TAS6424E Register Map window is for reference. Most of the register settings are done on the Device
Monitor and Control window.
Click on the CONNECT button at the bottom left corner of the TAS6424E EVM application window, see
2-9. The LED next to the TAS6424E EVM changes from gray to green and the CONNECT button changes to a
DISCONNECT button.
Click on the TAS6424E Device Monitor and Control box.
This window has six major sections: global control section, channel control section, other control section, faults
and warnings section, AC load diagnostics section, and DC load diagnostics section.
2.5.2.1 Global Control Section
The Hi-Z, Mute, and Unmute buttons with the gray background controls all four channels at the same time. When
Hi-Z is selected, all four channels are put in Hi-Z. The display for each channel in the channel control section
reflect these buttons selections.
The Mute Pin button is the GPIO pin controlling the mute function of the device.
The Standby button is the GPIO pin controlling the standby function of the device.
The Reset button is software reset and puts the device back in default settings.
10 TAS6424R-Q1 Evaluation Module

Figure 2-9. Device Monitor and Control Window

Figure 2-10. Global Control Section

Copyright © 2023 Texas Instruments Incorporated
Figure 2-9 shows how the window is displayed.
SLOU563A – APRIL 2023 – REVISED SEPTEMBER 2023
www.ti.com
Figure
Submit Document Feedback