1. Slide and remove the solid-state drive mounting bracket from the mounting bracket slot on the palm-rest and keyboard
assembly.
2. Rotate the solid-state drive mounting bracket to 180 degrees.
3. Slide the solid-state mounting bracket into the mounting slot on the palm-rest and keyboard assembly.
4. Install the
2230 solid-state drive
Solid-state drive—M.2 slot two
Removing the 2230 solid-state drive from M.2 slot two
NOTE:
M.2 slot two supports only 2230 solid-state drive.
NOTE:
This procedure applies only to computers shipped with a 2230 solid-state drive installed in M.2 slot two.
1. Follow the procedure in
NOTE:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
NOTE:
To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.
2. Remove the
base
cover.
The following image indicates the location of the 2230 solid-state drive that is installed in M.2 slot two and provides a visual
representation of the removal procedure.
28
Removing and installing components
or
2280 solid-state
Before working inside your
drive, whichever applicable.
computer.