Table of Contents
Advertisement
1. Lift the Mylar to access the memory-module slot.
2. Align the notch on the memory module with the tab on the memory-module slot.
3. Slide the memory module firmly at an angle, into the memory-module slot.
4. Press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
NOTE:
Repeat step 1 to step 4 to install any other memory modules in your computer.
1. Install the
base
cover.
2. Follow the procedure in
Solid-state drive—M.2 slot one
Removing the 2230 solid-state drive from M.2 slot one
1. Follow the procedure in
NOTE:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
23
Advertisement
Table of Contents
