Solid-State Drive-M.2 Slot Two; Removing The 2230 Solid-State Drive In M.2 Slot Two - Dell Inspiron 14 5401 Service Manual

Steps
1. Slide and remove the SSD support bracket from the support bracket slot.
2. Depending on the type of solid-state drive (M.2 2230/M.2 2280), align and insert the SSD support bracket into the support bracket
slot.
3. Install the solid-state drive.
Solid-state drive—M.2 slot two

Removing the 2230 solid-state drive in M.2 slot two

Prerequisites
NOTE: This procedure applies only to computers shipped with a 2230 solid-state drive installed in M.2 slot two.
NOTE: Depending on the configuration ordered, your computer may support a 2230 solid-state drive or a 2280 solid-
state drive in M.2 slot two.
1. Follow the procedure in
2. Remove the base cover.
About this task
The following image indicates the location of the 2230 solid-state drive that is installed in M.2 slot two and provides a visual representation
of the removal procedure.
26 Removing and installing components
before working inside your computer.