Tax Programming - Sharp XE-A507 Instruction Manual

Tax Programming
Use the following procedure to select any option included in the tax group:
The register is adapted to US and Canadian tax systems. If the Canadian tax system is required,
NOTE
the tax system must be changed, then program the tax rate or tax table and quantity for doughnut
exempt which are described in this section.
Prior to the entry of sales transactions, the tax programming must be performed in accordance with the
laws of the state. The register is provided with programming four different tax rate. The one-tax system is
sufficient to cover most areas. However, in some areas that has a separate local tax (such as a Parish tax)
or a hospitality tax, the multi-tax system is useful.
If the taxable item is entered, the tax will be automatically added to merchandise subtotal according to the
programmed tax status for the department. The tax can be also entered manually.
The register is provided with two types of tax programming methods. The % tax method is used for a straight
percentage rate per dollar. The table tax method requires tax break information from the state or local tax
offices. Use the method which is acceptable in the state. The necessary data of tax programming will be
presented at local tax office.
Procedure
The screen continues.
The following illustration shows those options included in this programming group.
12 TAX
80
1.
In the SETTING window, select "12 TAX."
2.
Select any option from the following options list:
1 TAX SYSTEM
2 TAX1
3 TAX2
4 TAX3
5 TAX4
6 DOUGHNUT EXEMPT
• The TAX window will appear.
1 TAX SYSTEM
2 TAX1
3 TAX2
4 TAX3
5 TAX4
6 DOUGHNUT EXEMPT
l
See "Tax system" on page 81.
l
See "Tax1" on page 82.
l
See "Tax2" on page 82.
l
See "Tax3"on page 82.
l See "Tax4"on page 82.
l
See "Doughnut exempt"on page 84.
Tax system
Tax1
Tax2
Tax3
Tax4
Doughnut exempt