Sharp XE-A40S Instruction Manual page 60

Item
Total in drawer
report
Individual clerk
report
Full clerk report
Hourly report
(full)
Hourly report
(by range)
Daily net report
• When both sales quantities and sales amounts are zero, printing is skipped. If you do not want to
skip, change the programming. (Refer to "Print format" of "Various Function Selection
Programming 1".)
• "X" represents read symbol and "Z" represents reset symbol in the reports.
• To stop reading and resetting the PLU sales report, turn the mode switch to the MGR position.
The data will not be erased when you reset.
58
Mode switch position
OPX/Z X1/Z1 X2/Z2
-- X1 X2
-- --
X, Z
-- X1, Z1 X2, Z2
-- --
X1, Z1
-- --
X1
-- --
X2, Z2
Reading:
Reading:
(The report of the current clerk)
Reading:
Reading:
Reading: Start time
(hour)
Reading:
Key operation
Resetting:
Resetting:
Resetting:
End time
(hour)
Resetting: