Sharp XE-A40S Instruction Manual page 42

Toggles between single-size and double-size characters. By default, the single-size character is
selected. Once the
displayed when double-size characters entry is selected as shown in the operator display example
below.
Backs up the cursor, erasing the character to the left.
Operator display (Example)
To program the word "Clerk01" with the letter "C" being double size.
To make the letter "C" double size character
To make character size return to normal size
To toggle the characters to lower-case letters
To enter numbers
Entering character codes with numeric keys on the keyboard
Numerals, letters and symbols are programmable by entering the character code and the
characters entry is selected, "1" is displayed on the operator display (lower line). Press the
it.) Set the alphanumeric character code table on the next page. By doing this, you can program characters
other than those on the key tops.
• Double-size characters can be made by entering the character code 253 or pressing the
displayed when double-size characters entry is selected as shown in the operator display example below.
• All three digits of the character code MUST be entered (even if it starts with zero).
Operator display (Example)
Press of
253 065
Department code, PLU code, function number,
clerk code or logo message line number is displayed here.
Characters entered are displayed here.
To program the word "SHARP" in double-size characters
253
When you press an appropriate number key (job code number) and press the
start programming with the
40
key is pressed, you are locked in for entering double size characters. "W" is
Cursor
ABCD
01
Department code, PLU code, function number,
clerk code or logo message line number is displayed here.
Characters entered using character keys is displayed here.
Cursor
PGM
01 W 065
083 072
S H
key, the cash register will automatically be ready for text entry.
PGM
Wa1 04
Number of characters programmed
Characters: Indicating double size character of "A"
Press of
Character code
065 082
A R
=C
01 W
=C
01
=C
01 a
=Clerk
01 a
=Clerk01
01 a1
key. (If numeric
=A PGM
01 W
Number of characters
programmed
080
P
key for text entry just after you
PGM
02
PGM
02
PGM
02
PGM
06
PGM
08
key to release
key. "W" is
02