Sharp HT-SL70 Operation Manual page 9

System preparation (continued)
2. Using stand (vertical arrangement)
For model Use sound bar stand cover : 10 - 2/16" (257 mm).
HT-SL75 Use stand base : 13 - 7/32" (336 mm).
For model Use sound bar stand cover : 6 - 3/32" (155 mm).
HT-SL70 Use stand base : 6 - 15/16" (176 mm).
1. Pull out the cover of sound bar stand as below.
Cover
2. Slot in the sound bar into the sound bar stand and fix its
cover as shown.
3. Slot in the sound bar to the base stand according to your
TV size.
(For model HT-SL70)
46" TV
52" TV
Groove to
neatly arrange
the wire in.
Sound bar
stand cover
(For model HT-SL75)
60" TV
70" TV
Groove to
neatly
arrange the
wire in.
Suggestion of the
sound bars and
LCD TV arrangement.
3. To mount the sound bar on the wall
1. Fix the brackets to the holes as shown.
(Model HT-SL75 : for 60" and 70" TV)
(Model HT-SL70 : for 52" TV)
RIGHT
(Model HT-SL70 : for 46" TV)
RIGHT
Caution:
Be careful not to
fix the bracket
upside down.
E-8
Slot in the wire inside the
groove or slit for better
wire arrangement.
LEFT
LEFT