Toshiba DR20KB Owner's Manual page 34

E7TE0BD_EN.book Page 34 Friday, March 5, 2010 5:08 PM
Checking, Cancelling or Correcting the
Timer Programming Information
1
Press [ ON STANDBY] to cancel the
timer-standby mode.
2
Press [TIMER PROG.].
"Timer Programming" list will appear.
3
A) To delete the timer programme:
1) Select the programme you want to delete using
[K L], then press [ENTER OK].
2) Select "Delete" using [K L], then press
[ENTER OK].
Confirmation window will appear.
3) Select "Yes" using [K L], then press [ENTER OK].
B) To correct the timer programme:
1) Select the programme you want to correct using
[K L], then press [ENTER OK].
2) Select "Programme Change" using [K L], then press
[ENTER OK].
3) Correct the timer programme by using [K L 0 1],
then press [ENTER OK].
4
Press [TIMER PROG.] to exit.
5
Press [ ON STANDBY] to return to the timer-
standby mode.
To check the timer programming in progress
Press [TIMER PROG.].
Note
• If a timer recording is proceeding, that programme is
highlighted in red. In such a case, you cannot select any
other programmes.
• If you delete or correct one of the series link timer recording
programmes, all related programmes will be deleted or
corrected.
• For EPG timer recording, you can only correct the "Mode"
and "STTL".
Stop the Timer Recording in Progress
On the front panel:
Press [C STOP].
On the remote control:
1 Press [STOP C].
2 Select "Yes" using [K L], then press
[ENTER OK].
34
EN
If the Timer Programming did not
Complete Correctly
The error number appears on "Timer Programming" list.
Timer Programming
Date Start End
E40 17/05 7:00 9:00 1 BBC1
New Programme
The error programme will be displayed in grey with an error
number.
The error numbers indicate:
E1–E22, E37–E39 Recording error
E23–E24 Unrecordable disc
E25/E51 • Copy prohibited programme
• Cannot record because of the NTSC /
PAL-60 signal is received.
E26–E28 Copy prohibited programme
E29 Disc protected
E30 Disc full
E31 Already recorded 99 titles (video mode)
E32 Already recorded 99 titles (VR mode)
E33 Already recorded 999 chapters
E34 No space for Control Information
E35 PCA (Power Calibration Area) full
E36 Already finalised video format disc
E40 • There are some unrecorded parts due
to the overlapped timer programmes.
• Recording did not start at the start
time.
E41 Power failure
E42 No disc
E43 Already 49 titles recorded (+VR mode)
E44 Already 254 chapters recorded (+VR
mode)
E45 Copy prohibited programme
E46 It is impossible to record additionally on
a disc recorded by other units when
setting "Make Recording Compatible" to
"OFF". (+VR mode)
• The error programme will be deleted once you check the
error in the programme list, or once you cancel the timer-
standby mode and re-enter it.
10:00 MON 17/05
STTL
CH
PDC
1/1