1090 Keyboard - Lenovo V480 Hardware Maintenance Manual

Detach the connector 1
When installing: Make sure that the connector is attached firmly.

1090 Keyboard

For access, remove these FRUs in order:
• "1010 Battery pack" on page 43
• "1020 Bottom slot cover" on page 44
Removal steps of keyboard
Remove the screws 1 .
When installing: Make sure that the screws have been fastened to secure the keyboard.
Step Screw (quantity)
1
M2.5 × 8 mm, flat-head, nylon-coated (3)
, and then remove the battery pack in the direction shown by the arrow
Color Torque
Black 3.0 kgfcm
.
Chapter 7 Removing and replacing a FRU
2 .
51