1070 Msata Solid State Drive - Lenovo V480 Hardware Maintenance Manual

Removal steps of PCI Express Mini Card for wireless LAN
1
In step , disconnect the cables from the card using the removal tool antenna RF connector (P/N: 08K7159)
or pick up the cables with your fingers and then gently disconnecting the cable from the card in the direction
of the arrows. Then remove the screw
Step Screw (quantity)
2
M2 × 3 mm, flat-head, nylon-coated (1)
Remove the card in the direction shown by the arrow
When installing: Plug the black cable (MAIN) into the jack labeled 1, and the white cable (AUX) into the jack
labeled 2 on the card.

1070 mSATA solid state drive

For access, remove these FRUs in order:
• "1010 Battery pack" on page 43
• "1020 Bottom slot cover" on page 44
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
2 .
3 .
Color Torque
Black 1.6 kgfcm
.
Chapter 7 Removing and replacing a FRU
49