Brother DCP-7057 Service Manual page 76

■ Error code 5A
These errors do not usually occur in the normal use. The conceivable causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
---
Error, which cannot be specified, occurs.
Error code 5B
Short Paper
Open the Back Cover and then press Start.
Error, which cannot be specified, occurs.
Error code 5C
Small Paper
Open the Back Cover or press Start.
Error, which cannot be specified, occurs.
Error code 5D, 5E
---
Error, which cannot be specified, occurs.
Error code 5F
WT Box End Soon
Error, which cannot be specified, occurs.
Error code 60
Replace Toner
Open the Front Cover, replace Toner Cartridge.
Error, which cannot be specified, occurs.
Error code 61
Replace Toner
Open the Front Cover, replace Toner Cartridge.
Error, which cannot be specified, occurs.
Error code 62
Replace Toner
Open the Front Cover, replace Toner Cartridge.
Error, which cannot be specified, occurs.
<User Check>
• Turn OFF the power switch, and turn it ON again after a while.
Step
1 Main PCB failure
Cause
2-39
Remedy
Replace the main PCB ASSY.
Confidential