Lenovo G460 Hardware Maintenance Manual page 67

Figure 16. Removal steps of bluetooth daughter card and base cover (continued)
Remove the power assembly in the direction shown by arrows
When installing: Make sure that the power connector is attached firmly.
Remove one screw
3
shown by arrow .
4
When installing: Make sure that the USB connector is attached firmly.
Step Screw (quantity)
M2.0 × 3 mm, flat-head, nylon-coated (1)
3
2
and then remove the USB assembly in the direction
Lenovo G460
.
2
2
3
4
Color Torque
Black 0.4 Nm
(4 kgfcm)
63