Lenovo G460 Hardware Maintenance Manual page 51

Disconnect the two wireless LAN cables (black, white) and the two wireless
WAN cables (red, blue) in the direction shown by arrows
the screws .
2
In step , unplug the jacks by using the removal tool antenna RF connector
1
(P/N: 08K7159), or pick up the connectors with your fingers and gently unplug
them in the direction shown by arrows.
Notes: wireless LAN card has 2 cables in step
wireless LAN card in some models may have 3 cables in step
wireless WAN card has 2 cables in step
Step Screw (quantity)
M2.0 × 3 mm, flat-head, nylon-coated (2)
2
Figure 10. Removal steps of PCI Express Mini Card for wireless LAN/WAN
(continued)
Remove two cards in the direction shown by arrows
When installing:
• In models with a wireless LAN card that has two antenna connectors, plug
the black cable into the jack labeled 1, and the white cable into the jack
labeled 2 on the card.
• In models with a wireless WAN card that has two antenna connectors
the red cable into the jack labeled MAIN, and the blue cable into the jack
labeled AUX on the card.
5
5
Lenovo G460
, and then remove
1
.
1
.
1
Color
Black
.
3
.
1
Torque
0.4 Nm
(4 kgfcm)
, plug
47