Table of Contents
Advertisement
Chapter 1
Introduction
Cables and Accessories
Cable
SHC68-68-RMIO
(NI Recommended)
SHC68-68-RDIO
(NI Recommended)
SH68-C68-S
*
For a diagram of the twisted pairs in the SHC68-68-RMIO and SHC68-68-RDIO cables and the signals to which they
correspond, go to
ni.com/info
†
NI 7830R does not have Connector 2.
R Series Multifunction RIO User Manual
National Instruments offers a variety of products you can use with R Series
devices, including cables, connector blocks, and other accessories,
as shown in Table 1-3.
Table 1-3. R Series Connectivity Options
Connector
NI 783xR/
NI 781xR
784xR/785xR
—
0
†
0, 1, 2, 3
1, 2
†
0, 1, 2, 3
1, 2
and enter the info code
Refer to Appendix A,
about using these cables and accessories to connect I/O signals to the
NI 78xxR. Refer to
to you for the most current cabling options.
Accessory
NI SCB-68 High-performance shielded cable
wired specifically for signal
connection from the RMIO
connector
terminal block to provide higher
signal integrity and noise immunity.
NI SCB-68 High-performance shielded cable
wired specifically for signal
connection from the
RDIO connector
terminal block to provide higher
signal integrity and noise immunity.
NI SCB-68 Basic shielded cable for signal
connection from the RMIO or
RDIO connector to the NI SCB-68
terminal block for noise reduction.
.
rdrmio
Connecting I/O
Signals, for more information
or contact the sales office nearest
ni.com/products
1-8
Description
*
to the NI SCB-68
*
to the NI SCB-68
ni.com
Advertisement
Table of Contents
