Table of Contents
Advertisement
1
Wear Personal Protective Equipment
(PPE). Wear full eye protection, ear
protection, non-slip heavy-duty gloves,
substantial footwear, and protective
clothing at all times while operating the
product. Do not operate the product
when barefoot or wearing open sandals.
6
Tighten the bar mounting nut.
NOTE: The temperature of the chain
increases during normal operation,
causing the chain to stretch. Check the
chain tension frequently and adjust as
required. A chain that is tensioned while
warm may be too tight upon cooling.
Make sure that the chain tension is
correctly adjusted as specified in these
instructions.
10
Getting started
2
1
2
Remove the cap from the oil tank. Pour
the oil into the oil tank, and monitor
the oil level gauge. Ensure that no dirt
enters the oil tank while filling.
NOTE: Use only RYOBI chainsaw
lubricating oil from an authorised
service centre.
7
Insert the battery pack into the product.
Make sure that the latch of the battery
pack clicks in place and that the battery
pack is fully seated and securely
attached before beginning operation.
3
Never work without chain lubricant.
If the saw chain is running without
lubricant, the guide bar and the saw
chain can be damaged. Before and
while using the chainsaw, check the oil
level in the oil level gauge.
WARNING: Grip both handles with
the thumbs and fingers encircling the
handles. Ensure that the left hand is
holding the front handle so that the
thumb is underneath.
Advertisement
Table of Contents
