Setting A User Channel, An Itu Simplex Channel, Or An E-Mail Channel - Icom IC-M803 Instruction Manual

■ Setting a User channel, an ITU Simplex channel, or an e-mail
channel
Your dealer has already preset User channels, ITU
Simplex channels, and e-mail channels.
Follow the instructions as described below, only when
you need to edit the channels.
You can edit the following information of a User
channel, an ITU Simplex channel, or an e-mail channel.
• Operating frequency
• Operating mode or operating filter
• Channel name
NOTE:
• If you edit the preset channels, you may not be
able to communicate with other vessels.
• The following instructions are for User channel
editing. However, you can edit an ITU Simplex
channel and an e-mail channel in the same way.
Step 1. Entering the Channel Edit screen
1. Open the "User CH," "ITU Simplex CH," or "e-mail
CH," screen.
[MENU] > Radio Settings > User CH
[MENU] > Radio Settings > ITU Simplex CH
[MENU] > Radio Settings > e-mail CH
2. Select a channel you want to edit.
Step 2. Setting an RX and TX operating frequencies
NOTE: The RX and TX operating frequencies are
the same when you select an ITU Simplex channel.
1. Select "Frequency."
OTHER FUNCTIONS AND OPERATIONS
2. Enter an RX frequency, and then push
3. Enter a TX frequency, and then push
Step 3. Setting an operating mode or operating filter
1. Select "Mode."
Rotate
L When editing an e-mail channel, select "Filter."
2. Select an operating mode.
+
Push
L When editing an e-mail channel, select a filter
Rotate
+
Push
width from Wide, Middle, and Narrow in this step.
► Continued on the next page.
6
.
Rotate
+
Push
6
.
Rotate
+
Push
Rotate
+
Push
Rotate
+
Push
21