Remote Control; Smartgrid - Miele WXF 660 WCS TDos Operating And Installation Instructions

Settings

Remote control

The
Remote control
visible if the Miele@home
up and activated.
Once the Miele app has been installed
on your mobile device, you can check
the status of your washing machine
from anywhere and start it remotely.
You can also control it remotely via the
MobileStart program.
You can switch off the
setting if you do not want to operate the
washing machine with your mobile
device.
If is not switched on, the
Remote control
app can cause the program to be
canceled.
Use the Delay Start button to set a time
until you want to start the washing
machine and start the Delay Start
function (see "Delay Start/SmartStart").
The washing machine will then start
within the timeframe specified when it
receives your signal.
If it has not received a start signal by
the latest start time set, the washing
machine will start automatically.
Remote control is activated as
standard.
98
setting is only
setting is set
Remote control

SmartGrid

The setting is only visible if
SmartGrid
the Miele@home
activated.
You can set your washing machine to
start automatically based on an
external signal within a certain time
period.
Activating SmartGrid
Start sensor button a new function. You
set the SmartStart
button. The washing machine will then
start within the time period specified by
you when it receives an external signal.
If an external signal has not been
received by the latest start time set, the
washing machine will start
automatically (see "Delay Start").
SmartGrid is deactivated as standard.
setting is set up and
gives the Delay
via the Delay Start