Delay Start/Smartstart - Miele WXF 660 WCS TDos Operating And Installation Instructions

 Delay start/SmartStart

Delay Start
With the Delay Start function, you can
delay the start of the program.
This function is active when the
setting
SmartGrid
The hours can be set in the values from
00 to 24 . The minutes can be set in 15-
minute increments from
Setting the Delay Start time
 Touch the  sensor button.
The following will appear in the display:
 
Start in
 
 Set the hours with the  sensor
buttons. Confirm with the OK sensor
button.
The display will change:
 
Start in
 
 Set the minutes with the  sensor
buttons. Confirm with the OK sensor
button.
Tip: The values will count upward and
downward automatically if you keep
your finger on the  sensor buttons.
is switched off.
to .
00 45
00 :00 h
06: 00 h
4. Selecting program settings
Canceling Delay Start
The selected delay-start period can be
canceled before the program starts.
 Touch the  sensor button.
The selected delay-start period will
appear in the display.
 Set a time value of
  sensor buttons. Confirm with
the OK sensor button.
The selected delay-start period has
been canceled.
After the program has started, the
selected delay-start period can only
be changed or canceled by
interrupting the program.
OK
Changing Delay Start
The selected delay-start period can be
changed before the program starts.
 Touch the  sensor button.
 Change the specified time and
confirm with the OK sensor button.
OK
00:00 h with the
29