Table of Contents
Advertisement
Installation
Water drainage
The suds are drained through a drain
pump with a 3'3³⁄₈" (1 m) delivery head.
For the water to drain freely, the hose
must be installed free of kinks.
If required, the hose can be extended to
a length of up to 16'4⁷⁄₈" (5 m).
Accessories are available from Miele.
Drainage options:
1. Direct into a sink or basin:
Please note:
– Hook the hose over the edge and
secure!
– If the water is pumped into a sink,
be sure that it can drain away
quickly enough. Otherwise there is
a risk of water overflowing or of
some of the drained water being
sucked back into the machine.
2. Connected securely to a plastic drain
pipe with a rubber nipple (there is no
need to use a non-return valve).
3. Connected securely to a floor drain.
4. Connected securely to a sink with a
plastic nipple.
88
Installing the elbow
Use the elbow supplied to stop the
drain hose from slipping.
Attach the elbow to the drain
hose .
Place the end of the drain hose in a
sink.
Use a strap with eyelet to stop the
elbow from slipping.
Advertisement
Chapters
Table of Contents
