Miele WXF 660 WCS TDos Operating And Installation Instructions page 53

Table of Contents

Advertisement

 = low water level
 = medium water level
 = high water level
 = intensive rhythm
 = normal rhythm
 = sensitive rhythm
 = ultra sensitive rhythm
 = handwash rhythm
 = carried out
= not carried out
This washing machine has fully
electronic controls with automatic load
control. The washing machine takes in
the right amount of water required for
the program depending on the amount
of laundry and its absorbency rate.
The program sequences outlined in the
chart are based on the basic program
with a full load.
Program sequence
Special features in the
program sequence
Anti-crease:
At the end of the program, the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
Exception:There is no anti-crease phase
in the Normal, Woolens , Silks 
and Handwash programs.
The washing machine can be opened at
any time.
1
An additional rinse is carried out if:
- there is too much foam in the drum
- a spin speed lower than Medium
(800 rpm) has been selected.
2
An additional rinse is carried out if the
ExtraRinse extra option has been
selected.
3
Run-up to spin: A run-up to spin is
carried out before the wash process
begins to deflate down-filled items.
Subsequent water intake for the main
wash is through compartment .
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wxf 660

Table of Contents