Specifying The Day Of The Week Language; Enabling The Button Operation Tone; Resetting Watch Settings - Casio 3509 Operation Manual

Specifying the Day of the
Week Language
You can select any one of six languages for
the day of the week display in the Timekeeping
Mode.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
3.
Press (C) 10 times.
This causes the language setting to flash.
4.
Use (D) to select a language.
[ENG]: English
[ESP]: Spanish
[FRA]: French
[DEU]: German
[ITA]: Italian
[PyC]: Russian
5.
Press (A) to exit the setting screen.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Watch Operation Guide 3509
Enabling the Button
Operation Tone
Use the procedure below to enable or disable
the tone that sounds when you press a button.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
Home City
3.
Press (C) 11 times.
This causes [KEY♪] or [MUTE] to flash on
the display.
4.
Press (D) to select [KEY♪] or [MUTE].
[KEY♪]: Operation tone enabled.
[MUTE]: Operation tone muted.
5.
Press (A) to exit the setting screen.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Note that alarm and timer tones will still
●
sound even while the operation tone is
muted.

Resetting Watch Settings

This section explains how to return the watch
settings below to their initial factory defaults.
Watch Settings
●
Stopwatch
●
Timer
●
Alarm
●
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
Release the button when the name of the
Home City
currently selected Home City appears on
the display.
3.
Press (C) twice.
This causes the seconds to flash.
4.
Hold down (B) for at least six seconds.
Release the button when [ALL] stops
flashing.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Resetting the watch will also delete
●
information for pairing the watch with a
phone, and unpair them.
Home City
Seconds
21