Table of Contents
Advertisement
World Time
You can view the current time in 38 cities (38
time zones), and UTC (Coordinated Universal
Time).
Using CASIO WATCHES to
Configure World Time City
Settings
If the watch is paired with a phone, you can
also use CASIO WATCHES to set the World
Time city.
Configuring World Time Settings
l
Note
World Time cities that can be selected
●
only by using CASIO WATCHES
cannot be selected using watch
operations.
Checking World Time
1.
Enter the World Time Mode.
Navigating Between Modes
l
This displays the current World Time City
and the current time there.
World Time
Pressing (A) displays the World Time
●
City again.
To change the selected World Time
●
city, press (D).
Watch Operation Guide 3509
World Time City Setting
Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also
configure a summer time setting.
Note
The initial factory default summer time
●
setting for all cities is [AUTO]. In many
cases, the [AUTO] setting lets you use
the watch without switching between
summer time and standard time.
1.
Enter the World Time Mode.
Navigating Between Modes
l
2.
Use (D) to display the city you want.
Holding down (D) scrolls through
●
settings at high speed.
3.
To change the summer time setting, hold
down (A) for about two seconds.
4.
Use (D) to select a summer time setting.
[AUTO]
●
The watch switches between standard
time and summer time automatically.
[OFF]
●
The watch always indicates standard
time.
[ON]
●
The watch always indicates summer
time.
5.
Press (A) to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
While [UTC] is selected as the city, you
●
will not be able to change or check the
summer time setting.
If you select a World Time City with the
●
CASIO WATCHES phone app and
then change to a different city with a
watch operation, the CASIO
WATCHES city information is deleted
from the watch.
Configuring World Time Settings
l
Swapping Your Home Time
and World Time
In the World Time mode, press (A) and (B) at
the same time to swap your Home City time
with your World Time.
Example: To swap your Home City "TYO"
(Tokyo) with your World Time City "NYC"
(New York)
Before swapping
After swapping
NYC time
Note
This function comes in handy when
●
you need to move to another time
zone. For details about how to use it,
go to the section below.
Moving to Another Time Zone
l
TYO time
16
Advertisement
Table of Contents
