Phone Finder - Casio 3509 Operation Manual

Configuring the Summer Time Setting
●
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] start to flash.
When a connection is established
●
between the watch and phone,
[CNCT] will stop flashing and remain on
the display.
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
3. Y
Perform the operation shown on the
phone screen to select a summer time
setting.
"Auto"
●
The watch switches between standard
time and summer time automatically.
"OFF"
●
The watch always indicates standard
time.
"ON"
●
The watch always indicates summer
time.
Note
While the summer time setting is
●
"Auto", the watch will switch between
standard time and summer time
automatically. You do not need to
switch between standard time and
summer time manually. Even if you are
in an area that does not observe
summer time, you can leave the
watch's summer time setting as "Auto".
Changing the time setting manually
●
with a watch operation will cancel auto
standard time/summer time switching.
For information about summer time
●
periods, refer to the "Summer Time
Table" or CASIO WATCHES.
Watch Operation Guide 3509
Swapping Your World Time and Home
●
Time
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least three
and
e
seconds. Release the button when
[CNCT] start to flash.
When a connection is established
and
●
e
between the watch and phone,
[CNCT] will stop flashing and remain on
the display.
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Connected
Trying to connect
3. Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
Note
Auto time adjustment does not work for
●
24 hours after swapping of the Home
Time and World Time.

Phone Finder

You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
and
e
Important!
and Do not use this function in areas where
e
●
phone call tones are restricted.
The tone sounds at a high volume. Do
●
not use this function when listening to
phone output over earphones.
1. X
If the watch is connected with a phone,
Connected
press any button to terminate the
connection.
Connected
2. X
If the watch is in any mode besides the
Timekeeping Mode, hold down (C) for at
least one second to enter the
Timekeeping Mode.
3. X
Hold down (D) for at least three
seconds. Release the button when
[FIND] start to flash.
The phone will sound a tone when it
establishes a connection with the watch.
It will take a few seconds before the
●
phone tone sounds.
Getting ready to
connect with phone
4. X
Press any button to stop the tone.
You can press any watch button to stop
●
the phone tone only during the first 30
seconds after it starts to sound.
Disconnected
and
e
Sounding phone
alert sound
11